Universal Spool Holder For Metal Enclosures
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Universal Spool Holder remixed to mount on all magnetic surfaces
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a remix of the popular Universal Ultimaker 2 Spool Holder that fits the Bambu X1C and P1S. This spool uses bearings to rotate smoothly. The spool holder is a separate part from the spool mount that attaches to the printer so you can easily swap between different spools.
You can position the spool holder in the center of the rear panel if your printer is in a narrow cabinet or enclosure that does not have enough width or clearance to use the offset stock Bambu spool holder. I use a 18" IKEA sektion cabinet for 2 printers so there is no space to put a 1kg spool on the stock spool holder which is why I adapted this spool mount to use my old Universal Spool Holders from my Ultimaker build. The magnetic spool mount can be placed anywhere on the back of the printer (or side of the X1C).
You will need the following extra parts:
- 2 x 608 bearings
- 1 x 120 long M8 screw or 1 x 130 threaded rod
- 1 or 2 M8 nuts depending on if you are using a screw or threaded rod.
The spool mount has been changed to take 18mm circular magnets up to 7mm in thickness. I used six 18x2 neodymium magnets to provide the holding power for a 1kg spool. More magnets can be added.