Privacy Shutter for Laptop or tablet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
sliding privacy shutter to cover the webcam on your laptop or tablet
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
This is a slim (1.2mm thick) camera cover that can slide over the lens of a laptop or tablet webcam to ensure your privacy.
it should fit most laptops unless they have a very narrow top bezel and is thin enough that it should not interfere with the closing of the laptop. It should not protrude much above the display of a tablet.
Attach to your device using double-sided tape.
Note: the base (the part with the holes) has a thin track that fits into grooves on the top section.
To assemble, place the base (print bed side down) onto the shutter and slide it into the grooves, then gently lift the leading edge over the stop-block. then place double-sided tape on the infill portions of the base and attach to your device.
Print with 0.1mm layer height
Made with FreeCAD 1.0 to able to edit the tolarances https://www.freecad.org/downloads.php
Remix from @rb_200934