1 / 3
Carousel Storage - SD Card
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Standard Digital File License
I created a Carousel Storage for SD card, inspired by Viral Carousel Storage for Switch Cartridges.
This design is built from scratch, optimizing features such as:
- Smoothness (Curve Profile, Bearing)
- Ergonomics ( Groove to make picking up easier)
- Aesthetic (Designed for Two-Tone color, customizable)
Works on SD card sized objects (Actual SD cards and Adapters).
Requirements
To Assemble, several hardware is required.
- M5 x 16-20 (can work)
- M5 nut
- 608 Bearing (can use 3D Printed ones, but worse)
Print Settings
Here are the following recommendation for print settings
- Material : PLA, PETG, ABS, any
- Walls : minimal 3
- Infil : Any Patterns, Denser for bottom section (e.g. 50% bottom, 30% top)
Happy Printing!