Ultimaker S3 tool holder (including print cores)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple print to mount on the side of a ultimaker S3 to hold a glue stick, some tools, and most importantly printcores.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
The model can be printed in 2 parts without supports, and mounted to the left side of the ultimaker 3S using the already present screws for the front door hinge.
Once mounted the print core can be clicked in and out using the same mechanism as in the print head. in addition the original wera screwdriver, USB key, and a glue stick can be placed as well. The second part is optional and is a small cup for small parts.
The geometry for the print core mechanism was used from the original ultimaker 3 hardware files https://github.com/Ultimaker/Ultimaker3