12pcs crochet set holder box using embedded magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
12pcs crochet set holder box using embedded magnets
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
3d printed crochet hook holder compatible with crochet set: https://www.muziker.com/alma-hooks-ch054 Alma CH054 Crochet Set 14 cm
the two sides are held together using magnets, the connection is not that strong, so i reccomend using a rubberband to hold it together, feel free to change the design to include larger magnets, and share it.
Both sides consist of 2 pieces a pla outter shell and an inner soft tpu holder, if you use a less flexible inner part you dont need to remove the 2 inner walls on the side, if its less soft you need to remove it, which can be easily done using a screwdriver.
the magnets need to be inserted during the printing process, make sure to insert them in the right direction. I used D3x3 magnets, but the ones i linked are D3x1, you can stack 3 on top to make it the right size.