12pcs crochet set holder box using embedded magnets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
12pcs crochet set holder box using embedded magnets
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 135
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
3d printed crochet hook holder compatible with crochet set: https://www.muziker.com/alma-hooks-ch054 Alma CH054 Crochet Set 14 cm
the two sides are held together using magnets, the connection is not that strong, so i reccomend using a rubberband to hold it together, feel free to change the design to include larger magnets, and share it.
Both sides consist of 2 pieces a pla outter shell and an inner soft tpu holder, if you use a less flexible inner part you dont need to remove the 2 inner walls on the side, if its less soft you need to remove it, which can be easily done using a screwdriver.
the magnets need to be inserted during the printing process, make sure to insert them in the right direction. I used D3x3 magnets, but the ones i linked are D3x1, you can stack 3 on top to make it the right size.