First Layer Calibrator for Prusa MK3S+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I find the built in calibration tedious. Just pause, inspect, resume, adjust until first layer is perfect. Presliced!
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I never liked the build in first layer calibration in my MK3S+ and I did not find a calibration that fitted what I wanted so I built it my self. Its just a line with a single perimeter. You can just pause the print, inspect the layer, resume printing and adjust the z-value.
I sliced the calibrator already for PLA and PETG and 0.25, 0.4 and 0.6 mm nozzle each. Just put them all on your SD card and run instead of the built in calibration.
Extrusion is set to 100% in any case! If you want to use other materials, nozzles, printers or extrusion factors I also included the model.