First Layer Calibrator for Prusa MK3S+
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I find the built in calibration tedious. Just pause, inspect, resume, adjust until first layer is perfect. Presliced!
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 91
- Makes
- 0
- Views
- 211
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
I never liked the build in first layer calibration in my MK3S+ and I did not find a calibration that fitted what I wanted so I built it my self. Its just a line with a single perimeter. You can just pause the print, inspect the layer, resume printing and adjust the z-value.
I sliced the calibrator already for PLA and PETG and 0.25, 0.4 and 0.6 mm nozzle each. Just put them all on your SD card and run instead of the built in calibration.
Extrusion is set to 100% in any case! If you want to use other materials, nozzles, printers or extrusion factors I also included the model.