Shower gel & shampoo corner shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A shower gel shelf for bolting on in a corner of your shower. Easy to detach for cleaning.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 278
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
A printable shelf for shower gel and shampoo for mounting on the wall in your shower's corner. Fits about three regular-sized shampoo bottles. Once mounted, the shelf can be detached and re-attached in just a second, for instance when you want to wipe the walls behind it.
Just select the variant you like best (with or without the fence, higher or lower fence) and print everything in one go. The shelf and fence print upside-down; the wall mount is already in its printing orientation. I used PCTG for getting a stronger mount, but PETG or PLA will also do just fine if you don't put several kilograms of stuff on the shelf. Important: The infill density should be set to 100%!
Needed to complete:
- Two counter-sunk screws and anchors
- If you're using the variant with a fence, some CA glue
Assembly:
- After printing, first apply some CA glue to the fence and attach it to the shelf.
- Slide the wall mount onto the lugs on the bottom of the shelf.
- With the mount held in place, hold the shelf against the wall where you like it best and mark the mounting holes on the wall.
- Drill the holes at the marked locations and bolt on the wall mount.
- Now you can just hook the shelf into place and detach whenever needed.
I made some slight optimizations to the design after I printed mine, but haven't done another print after that. So, please let me know how the print and assembly went!