Prusa Build Plate Caddy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I made this caddy to hold 4 Prusa Core One, MK4+Variant, and MK3+Variant build plates, with keyhole mounts for attaching it to the side of a desk or wall with M5 hex-head machine bolts. The plates are staggered so it's easier to grab each one, and you can feasibly fit more than one in each slot if you have more than 4 plates.
Mount this with 2 M5 Hex-Head bolts spaced exactly 9inches apart. I used machine screw inserts drilled into the side of my desk for the machine bolts to hold the caddy out of the way.
Print Settings:
PLA or PETG should work without issue
No supports required, you may experience warping on the bottom without a brim/raft, but mild warping will not affect the overall functionality.
10%-15% Infil is recommended, with at least 3 perimeters.
Fits in a standard Prusa Build Volume if rotated 35° in the Slicer.