1 / 10
Compact MMU3 PTFE Tube-Fitting Holder-Clip for MK4/S Frame — zdjęcie 1
1 / 10

Compact MMU3 PTFE Tube-Fitting Holder-Clip for MK4/S Frame

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This clip holds your reverse Bowden tube when you want to print without the MMU3 on the MK4/S

Ocena
5 / 5
Polubienia
28
Pobrania
90
Wydruki
3
Wyświetlenia
524
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is a clip that secures your reverse-Bowden tube-fitting to the printer frame when you want to print without the MMU3.  

I redesigned @fusefoxdesign 's clip so that it was more compact, and loaded from the left side, and had a tighter fit to the frame so it didn't move, and used less filament to print. He made an awesome build guide to a full MMU3+PrusaEnclosre+DryBox so check that out

It holds the PC4-M5 fitting that typically screws into the chimney of the Nextruder when printing without the MMU3.  Just unscrew the fitting and slip it into the clip.

I keep my original spool holder, my MMU3(UltiMulti), and this clip on the top of the frame, and when I want to print abrasives or flexibles, or otherwise just don't want to use my MMU, I use this clip to keep the tube from dangling around or getting in the way.

Its a tight fit, but attaches with a satisfying CLACK and stays put unless you move it.

I printed it in 24 minutes in Prusament PETG-CF with a 0.4 HF ObXidian nozzle, at 0.2 layer height, 15% gyroid infill, and 3 perimeters.

Tagi