1 / 10
Compact MMU3 PTFE Tube-Fitting Holder-Clip for MK4/S Frame — image 1
1 / 10

Compact MMU3 PTFE Tube-Fitting Holder-Clip for MK4/S Frame

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This clip holds your reverse Bowden tube when you want to print without the MMU3 on the MK4/S

Rating
5 / 5
Likes
28
Downloads
90
Makes
3
Views
530
Reviews
5

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This is a clip that secures your reverse-Bowden tube-fitting to the printer frame when you want to print without the MMU3.  

I redesigned @fusefoxdesign 's clip so that it was more compact, and loaded from the left side, and had a tighter fit to the frame so it didn't move, and used less filament to print. He made an awesome build guide to a full MMU3+PrusaEnclosre+DryBox so check that out

It holds the PC4-M5 fitting that typically screws into the chimney of the Nextruder when printing without the MMU3.  Just unscrew the fitting and slip it into the clip.

I keep my original spool holder, my MMU3(UltiMulti), and this clip on the top of the frame, and when I want to print abrasives or flexibles, or otherwise just don't want to use my MMU, I use this clip to keep the tube from dangling around or getting in the way.

Its a tight fit, but attaches with a satisfying CLACK and stays put unless you move it.

I printed it in 24 minutes in Prusament PETG-CF with a 0.4 HF ObXidian nozzle, at 0.2 layer height, 15% gyroid infill, and 3 perimeters.

Tags