1 / 3
Cat RFID Tag Keyfob Case Keychain - 25mm 125kHz
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Cat Shaped RFID Keyfob case for attaching a 25mm tag to a key chain.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 144
- Wydruki
- 2
- Wyświetlenia
- 468
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (25)Powiązane
Cat Shaped RFID Tag Keyfob Case Keychain - 25mm 125kHz
This is a simple model I made for attaching a 25mm adhesive-backed RFID tag to a key chain. I used these T5577 125kHz tags from AliExpress and configured them with a Proxmark3 Easy also from AliExpress. The tags I am using measure ~25mm in diameter and ~1.2mm thick. I have attached the F360 archive file and .STEP file for easy modifications.
Printing Info:
- Add a pause print command at the layer where the top is applied to place the RFID tag inside! Reference images.
- Make sure to place the tag with the adhesive facing UPWARDS. This allows the bridges to adhere better and avoid printing problems.
F360 Archive Notes:
- If you'd like to modify the F360 files, take note of two labeled dimensions that may be useful,
- Int_Gap = Internal Gap between the top of the RFID tag and the bridging layer.
- Base_Thick = Thickness of the top and bottom