1 / 3
Cat RFID Tag Keyfob Case Keychain - 25mm 125kHz — image 1
1 / 3

Cat RFID Tag Keyfob Case Keychain - 25mm 125kHz

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple Cat Shaped RFID Keyfob case for attaching a 25mm tag to a key chain.

Rating
5 / 5
Likes
25
Downloads
144
Makes
2
Views
468
Reviews
2

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

Cat Shaped RFID Tag Keyfob Case Keychain - 25mm 125kHz

This is a simple model I made for attaching a 25mm adhesive-backed RFID tag to a key chain. I used these T5577 125kHz tags from AliExpress and configured them with a Proxmark3 Easy also from AliExpress. The tags I am using measure ~25mm in diameter and ~1.2mm thick. I have attached the F360 archive file and .STEP file for easy modifications. 

Printing Info:

  • Add a pause print command at the layer where the top is applied to place the RFID tag inside! Reference images.
  • Make sure to place the tag with the adhesive facing UPWARDS. This allows the bridges to adhere better and avoid printing problems. 

F360 Archive Notes:

  • If you'd like to modify the F360 files, take note of two labeled dimensions that may be useful,
    • Int_Gap = Internal Gap between the top of the RFID tag and the bridging layer.
    • Base_Thick = Thickness of the top and bottom

Tags