Counting matching models…
Die Gewehrhalterung dient als Ersatzteil für die Standard-Ablage von Tec-Ro. sie ist dicker und mit einem Zusätzlichen Handtuchhalter ausgestattet. Die Schnellspannschraube und die Gummiplatte vom Originalteil kann 1:1 verwendet werden.…
This is a case to hold omnidirectional antennas and protect them while not in use. The case was designed around the TrueRC CORE 5.8ghz 125mm omnidirectional antenna pair. It uses four 8mmx2mm magnets for retention, but you could omit…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
Perfect Holder for a 25mm Clothing Rail I designed a holder specifically for a 25mm clothing rail, and it works perfectly. Here are the details: Design Features The hook is slightly smaller than the rail's diameter, allowing the rail to…
I have been FDM printing mini's for a decade. I am publishing my latest settings. These are for MK4 but the settings should apply to any other printer. Updated June 2026: I made some changes as well as argued with AI for further insights.…
End cap to fit over a 25mm pipe, used for preventing dirt ingress while laying pipe over numerous days, while renovating a bathroom. This is not airtight, don't use for active waste pipeing Print in PETG or PLA, 3 walls should give good…
Inspired by AvE's design. This is a completely remodeled version and is not a derivative or a modified version of the original. There are two versions depending on how you want the blade to stick out of the top. You will need one M3 heat…
a remix of alphaflight83, with chanfer sides, copying 28mm bases :D enjoy Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** No Supports: Yes **Resolution:** 0.16 Infill: 25% **Filament:** Polymaker Polyflex TPU Black…
I had been using the Universal Spool Holder that this model is remixed from, but wanted a way to fit more spools in my cabinet. I like the way the arms looked so I just carved out a notch for a curtain or shower (or clothes??) rod I found…
Just a 25mm base with a bit thicker walls to avoid the layer line you usually get when moving to the “hollow” layers of the base. Still contains a small cavity for a magnet. I'll come back and fill this out with other base sizes at a…
Download and 3D print this holder for push-on (clip-on) gas canisters! Securely fixes standard cylindrical 65-66mm canisters in a strictly vertical position on a 25mm diameter camping table leg. Essential for safe operation of push-on gas…
🚀 Support My Work🚀 If you enjoy my designs, you can help me keep the creative spark alive: Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎 Like & Download: Your…
🚀 Support My Work🚀 If you enjoy my designs, you can help me keep the creative spark alive: Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎 Like & Download: Your…
🚀 Support My Work🚀 If you enjoy my designs, you can help me keep the creative spark alive: Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎 Like & Download: Your…
Here you have number three of my tiny (scary) heroes, the crazy articulated dead snowman. It is designed with the connection type i use for my ultra articulated snakes, dragons and lizards. That enabled to get the size down to 25mm in…
It's an adapter to mount a tiny whoop or toothpick aio Board in an fpv drone frame with a 20x20mm mount. You should probably print it out of temperature resistant plastic, those aio board get very hot and pla might deform if the drone…
|| Total price of models if purchased separately : 71.5€ >> more than -30% OFF with the pack || Hello, High-detailed models of WW2 German tanks for 3D printing, we recommend to use this models on resin printing. All the models include…
The insert for the Polymaker Reusable Spool is just a little too small to fit a 25mm RFID such as the ones that are compatible with a Creality CFS (MIFARE 1k RFID tags which can be used with the “RFID for CFS” app) This remix knocks out…
Three Way Pipe-to-Pipe Clamp - Pipe Clip - Fissatubo triplo Ø20/25mm - Fissatubo triplo Ø20/25mm For quick installation of: RNC conduits Flexible & rigid tubing Corrugated pipe Designed for faster printing Minimal material usage Strong…
For Harleys with 1-1/4 in Handlebars Phone Mount Adapter for common 25MM Ball phone mounts. Requires 2xM4x16mm cup head screws and 2xM4 hex nuts, uses the ball adapter and securing screw from your mount. Two versions to print vertical or…
Als Adapter um Papp-Spulen im AMS / Qidi-Box oder ähnlichem zu verwenden. auch eine Version erweitert um die Möglichkeit einen NFC-Tag mit 25mm zu verwenden. Durchmesser: 199 , 120 , 121 mm V1: einfacher Ring - kein NFC V2: Ring mit…
You are paying to support the time and materials invested in prototyping and creating the model, and you will receive a STEP files for personal use. Inspired by AvE's design. This is a completely remodeled version and is not a derivative…
A base for cards or paper for TTRPG. THIN is good for playing cards or card stock THICK is good for cardboard cutouts 3 different Models Thin Thick Thick & Tall
Einstellbare Plattform zum Ausrichten von Lasern, z.B. für Laser-Lichtschranken (Alarmanlage). Durch das drehbare Innenteil in Verbindung mit dem 30°-Plate können nahezu beliebige Winckel ausgerichtet werden. Fixiert wird das ganze, indem…
Turns any 125 mm abrasive into a Festool-compatible disc, while preserving the dust collection performance. With this jig you can: Use generic or bulk sandpaper with Festool STF D125 (125mm) sanders Punch the correct hole pattern into…
A smaller handle/lever for your 25mm (1"), 19mm (3/4") or 13mm (1/2") TruDesign ball valve. Makes it easier to fit the ball valves in tight spaces where the original handle will not fit. Note that the original screw and screw cap are…
Remix of the great design by Ryan Bosley, this isolates just the feet sections for lower filament use and compatibility with original bottom plate. This is a cut down version of Ryans design that allows just the feet alone to be use with…
Small Sliding Lid Storage box 110mm x 65mm x 25mm for crafting etc
Parametric Lathe Faceplate Adapter 72mm-125mm. This adapter is meant to mount a Faceplate of size 72mm to a lathe with size 125 mm. As very temporary solution the PETG version can be used (95% infill recommended):…
Add a pause in your slicer before the gap is covered. After, put your 25mm tag inside and then continue the print. Also, you can add color change so wifi logo can be more distinguishable (like I did). I recommend printing this in 0.12…
Burton 25mm Strap Buckle – Easy-Install (No-Sew) This is a high-strength replacement buckle/connector designed for 25mm straps , compatible with Burton gear and similar outdoor equipment. No Sewing Required! Unlike standard buckles, this…
Box for small items (90x47x25mm) the box consists of three parts and can hold all small items that need to be protected. The print itself does not require any supports, and the different parts can be produced in a short time in any colour…
Abschlusskappe für ein standart Elektrorohr mit 20 oder 25mm Außendurchmesser mit einem einem eingezogenen 4mm oder 5mm Kabel. Zum Drucken die beiden Teile mit einem leichten Abstand platzieren. und nachdem das Kabel eingezogen ist, aber…
Clip is easily fixed at the straps's loop around the lock. Fits all standard 2,5/3m x 25mm cargo straps. 22.2.26: Added versions for shorter (1.5-2m) and longer (4-5m) straps. Strap can be rolled directly "into" the clip, release it by…
This is my second remix of Oliver's nerf accesories. This time it's a flashlight holder for 25mm or 1 inch simple led torch. Quite useful and cheap cuz the torch this is based on is 5 pln ( approx. 2 usd) Auchan flashlight. Recommend…
GER: Trichter mit integrierter Entlüftung für Flaschen mit großer Öffnung (25 mm) Dieser Trichter eignet sich ideal für Flaschen mit einer großen Öffnung von 25 mm. Dank der integrierten Entlüftung kann die eingeschlossene Luft während…
Holders for sanding discs, designed to be wall mounted. 80, 120, and 240 grit labels available, as well as a blank face. Oriented face down. Support required for "wings".
Einfaches Zehnerfeld für den Einsatz von 25mm Wendeplättchen für den Matheunterricht. Beispiel sind Wendeplättchen der Firma Wissner.
An Open 6x17 v8 lenscone for the Fujinon CMW (W) 125mm f5.6 large format lens. This version has a Focal Flange Distance of 119.9mm. This will need to be paired with a 17-31mm M65 helicoid, and a 3D printed lensboard to attach the lens.…
This is a simple insert designed for 25 mm quick-release collars used with adjustable dumbbells and barbells. It addresses the issue where collars labeled for 25 mm bars do not clamp tightly and can slide off during use. By adding this…
Remix All credits go to the original author, license is the same. This remix is more durable and easier to print. I cut off the sharp corners in the finger slots since attempting to print super sharp features result in fragile parts.…
My (żaluzje) blinds holder (one of 2) broke so I recreate the working one on tinkercad. 2 photos of my print, 2 photos of the working holder and a single photo of broken one. Model is recreating "V10" 19x25mm horizontal blinds Space…
Removable drone Light kit for standoffs at 25mm and 32mm. Reversible mounting for +-15 degree light tilt. With one light housing for the Arris E280 drone.
Paint bottle holders for big 33mm bottles and Citadel colors or 25mm bottles used by Vallejo, Greenstuffworld and Armypainter. The 25mm one has a tilted variant which is significantly more space efficient. The paintholders are connected…
Please see the original model description as this is just a bigger version to accommodate longer straps. My straps measured 4.7m so I guess it should work for strap lengths between 4.5 and 5m.
Dieses ist eine Sortierbox für Kleinteile. Fachgröße ca. 25x25mm Höhe ca 25 mm Material: PLA Farbe: nach belieben Schichtdicke 0,2mm gezeichent mit FreeCAD 2026-02-22 Frank WL
To hang against the wall and hold rods with a diameter of 25mm. My rod is a bamboo stick, which is quite uneven... so there's a gap. Printed without supports or brim in rPLA.
I converted a 25mm thick closet bifold door to french doors by duplicated the bifold hardware on both sides (I didn't want to mount hinges). I made this door catch to keep the new french doors from swinging too far inward as well as…
Gridfinity Tap Holder – 8x Threading Dies (Ø25mm) Compact and practical Gridfinity-compatible holder designed for organizing up to 8 threading dies . Each slot fits dies with a diameter of approximately 25mm and a depth of around 9mm .…
This is a Gridfinity bin for a Sylvac 25mm. The Bin is 4x2. There is a space for 6x2 Magnets in the corners. Base generated using Gridfinity bin generator. Custom tool cutout designed from scratch.
A simple dowel hanger for a wall or a surface to screw on. It requires: A 25mm diameter dowel/pipe, long as much as you need 4 screws with 8mm head (2 for each side)
A unique 3D printable creation — this Detailed Dungeon Floor Round Base 25Mm, Cobblestone Pattern, For Miniature Figures Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
Wanderer Astro Flat Panel V4-EC 125mm Askar SQA55 mount. The two halves of the clamp attach using two sets of M6 Screws and hex nuts The flat panel has slots for M3 nuts and M3x12mm Screws and attaches with four sets of these; two on…
A simple bike handlebar clamp, using Prusa spare screws. Can be mounted on any 2.25mm bike handlebar. Source file can be see here :…
Models I've used for the kitchen ducting
An upgrade for the Creality K1 printer series. The new mount requires cutting out a section of the case and installing a new fan mounting frame, measuring 80x80x25mm. For easy fan installation, I used common anti-vibration mounts, but you…
🚀 Support My Work🚀 If you enjoy my designs, you can help me keep the creative spark alive: Post a Make: Seeing your prints is the best reward! It also helps me earn Prusameters to keep the filament flowing. 💎 Like & Download: Your…
the top and bottom center pieces fit together (glue if needed) locking the arm in place I recommend printing the bottom center piece in clear PETG if possible
This is a replacement for the shower handle holder on Gustavberg Nautic G1/G2 shower set. Print with supports on the underside, and 100% solid, or as many vertical walls as possible. PETG or PCTG is recomended.
Halter für Kopfhörer um 90° zur Original gedreht. Ideal für Montage an Rand des Tisches wenn daneben ein Schrank steht.
This is 7x7cm mesh with 0.5mm strings and 0.25mm gaps Designed for printing in 2 layers with a layer thickness of 0.2 mm Printing goes in a long serpentine pattern for speed and to prevent defects at the ends Make sure to properly…
Just print the parts, put pegs in one side of each piece, put the pieces together, then screw it on. I didn't use glue or anything and It's pretty sturdy. Need to print 6 pegs.
Introduction I love the incredible SideKick filament loader that @MrFlippant designed. However despite my best efforts to source the specific DC 12V 1000RPM geared motor listed in his build guide for the direct drive I wasn't able to.…
Um einen Schirmständer der eigentlich für einen großen Schirm gedacht ist mit einem Mastdurchmesser von 58mm auch mit kleinen Sonnenschirmen zu nutzen, fehlte ein Adapter auf 25mm Durchmesser der Schirmstange für einen…
Nearly 2 years ago I created print-in-place bag clips. They work fine. But every thing can break (after a while). My printed models work great for rather some time (months) but eventually tend to break at the 2 small parts of the closing…
Ablageschale für das Canon 25mm f3,5 Objektiv mit Leica M Bajonettadapter. Die Schale ist im Durchmesser um 1 bis 2 mm größer, damit sie noch mit Velour ausgekleidet werden kann. ......................... Storage tray for the Canon 25mm…
While building DIY airbrush booth, I needed a flange for 125mm tube fan (generic one, used in bathrooms, kitchens). Fan fits inside, and using 6x M6 Screws you can mount this (no threads needed, screws will make them). In Slicer, you can…
Simple cap for aluminium profile 25x25mm. I recommend using 100% infill. Print speed 40mm/s. PLA at 200°C PLEASE LIKE MODEL AND FOLLOW ME.
Did not want to drill holes in my K1 Max Frame or Panels so designed Slim 25mm Riser. K1 Max Riser for 5 PTFE Combiner.
Print at 0.2mm layers added a pause at layer 222 to insert Captive 6mm Nuts (preferably Stainless Steel)
Some SEAFLO boxes do not contain the 25 mm connection. I have also included my freeCAD file to make it editing easier.
Chair leg caps (25mm ID of the cap), printed in generic tpu. Print at 40% infill minimum.
Easy way to mount items so they can slide along a pipe. The double roller prevents tipping when force is applied in the direction of rolling. Designed for pipes with a 25 mm outer diameter Also available as a single-roller model. Includes…
This model is a functional protective case for standard circular NFC tags (stickers or discs up to 25mm in diameter). The keychain is designed for embedding the tag during the 3D printing process, ensuring it is fully sealed, waterproof,…
Boat handrail pipe Ø25mm cup holder attached with L35mm M6 bolts. I recommend to use A4 quality. Dimensions made for standard 0,5l beer can as in picture.
With this clamp you can mount the RTK Pole of the Anthbot robot lawnmower to a wall or some other flat surface. This is much more strurdy than the standard ground spike mount and prevents accidental movement of the rtk antenna. The clamp…
An XXL version, that fits quite a lot of bottles. I printed it with solid infill, to make it extra strong. The amount of filament was not that much (225 grams) for something that is used every day. I opted for PETG. And just as CrashKG…
Just a few simple terrain bits. I used Solidworks to make them. I noted the fonts used on the two with text.. I had an Elvish Runes version, but the text caused overlapping areas it couldn't figure out how to handle. Too late to fix it…
Professional connector system engineered in Siemens NX for 25x25mm square steel profiles (1.2mm wall thickness). This is not just a 3D model, but a complete engineering solution for structural DIY projects, modular furniture, or…
Print with 1mm layer height ideally so that the threads are clean
A classic, essential tool for every 3D printer enthusiast. This 25mm XYZ Calibration Cube helps you verify your printer's dimensional accuracy and axis alignment. Based on the preview image, it prints beautifully with clean lines and…
the main feature of the design: you don't need to print the entire blade, you only need to print the sword's guard. (you can also print the back part to adjust the balance) What you need to assemble the sword: a tube with a diameter of…
Description BitForge is a 3D printable modular organizer designed for standard 25 mm screwdriver bits (6.1 mm hex). It combines angled bit storage with smooth sliding drawers, keeping your workspace clean and efficient. Designed for…
A lightweight, ergonomic paint rack designed specifically for model painters. Optimized for Cap-Down storage . Keep your paints ready to use instantly – no more shaking or pumping. Paint flows directly to the tip. However, thanks to the…
Ułatw sobie codzienne sprzątanie dzięki funkcjonalnemu adapterowi do kija o średnicy 25 mm. To praktyczne rozwiązanie, które zwiększa wygodę użytkowania i pomaga utrzymać porządek w domu, garażu lub warsztacie. Adapter został…
This fits the Phillips Norelco 9000 Multigroom series wide T-Head trimmer but it may fit others. I've been looking for one for awhile so I decided to modify a regular head and I needed to widen some and remove other combs/fins to make it…
I made this adapter for a cheap aluminium bottle holder which I bought on aliexpress ( https://bit.ly/3B7Toc3 ) because I didn't found right one for my niece kids scooter (kick scooter)... Adapter suitable for pipes with 25mm diameter)…
