1 / 1
Festool STF D125mm sand paper hole punching template — image 1

Festool STF D125mm sand paper hole punching template

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Turns any 125 mm abrasive into a Festool-compatible disc, while preserving the dust collection performance.

Rating
0 / 5
Likes
6
Downloads
19
Makes
0
Views
100
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Share Alike

Turns any 125 mm abrasive into a Festool-compatible disc, while preserving the dust collection performance.

With this jig you can:

  • Use generic or bulk sandpaper
    with Festool STF D125 (125mm) sanders Punch the correct hole pattern into standard 125 mm discs instead of buying brand-specific abrasives.

  • Punch interface pads and foam backing pads 
    Useful for soft pads, protectors, or custom stacks that don’t come pre-perforated.

How to use

  1. Place sandpaper or interface pad into the recess

  2. Align flat on a solid surface

  3. Use a hand punch (≈ 8–9 mm)

  4. Punch center hole first, then outer holes

  5. Remove paper — perfectly aligned holes every time

Print settings

  • Layer height: 0.2 - 0.6 mm

  • Infill: 20–30% (gyroid or cubic)

  • Walls: 2–3 perimeters

  • Top / bottom: 2–3 layers

  • No supports needed, print flat side on the bed

Tags