Counting matching models…
This is a case to hold omnidirectional antennas and protect them while not in use. The case was designed around the TrueRC CORE 5.8ghz 125mm omnidirectional antenna pair. It uses four 8mmx2mm magnets for retention, but you could omit…
Turns any 125 mm abrasive into a Festool-compatible disc, while preserving the dust collection performance. With this jig you can: Use generic or bulk sandpaper with Festool STF D125 (125mm) sanders Punch the correct hole pattern into…
Parametric Lathe Faceplate Adapter 72mm-125mm. This adapter is meant to mount a Faceplate of size 72mm to a lathe with size 125 mm. As very temporary solution the PETG version can be used (95% infill recommended):…
Holders for sanding discs, designed to be wall mounted. 80, 120, and 240 grit labels available, as well as a blank face. Oriented face down. Support required for "wings".
An Open 6x17 v8 lenscone for the Fujinon CMW (W) 125mm f5.6 large format lens. This version has a Focal Flange Distance of 119.9mm. This will need to be paired with a 17-31mm M65 helicoid, and a 3D printed lensboard to attach the lens.…
Remix All credits go to the original author, license is the same. This remix is more durable and easier to print. I cut off the sharp corners in the finger slots since attempting to print super sharp features result in fragile parts.…
Wanderer Astro Flat Panel V4-EC 125mm Askar SQA55 mount. The two halves of the clamp attach using two sets of M6 Screws and hex nuts The flat panel has slots for M3 nuts and M3x12mm Screws and attaches with four sets of these; two on…
Models I've used for the kitchen ducting
While building DIY airbrush booth, I needed a flange for 125mm tube fan (generic one, used in bathrooms, kitchens). Fan fits inside, and using 6x M6 Screws you can mount this (no threads needed, screws will make them). In Slicer, you can…
[UPDATE: New, stronger version here: ] [Older version below] Print in place bag clips 50mm, 75mm, 100mm, 125mm and 150mm. No supports needed. Just print, take it from the buildplate/heatbed and use. Mine are printed with PETG 0.6mm…
Extension platform for Parkside 125mm disc sander. I use it primarily for re-grinding of 25-degree bevels on chisels and plane irons. The platform serves as a surface on which a honing guide can rest. The material removal is less…
A 125mm angle grinder mount that uses Sy's Peglock system. (Printed without supports)
This is an adapter ring that allows for a Fujinon SW 125mm 5.6 aperture medium format lens to fit the appropriate lens cone and board for the chroma six 17 camera. I received mine and the shutter isn't what was recommended so the lens…
I made a remix via the original creators parametric file to use with metric sizing. It now takes 1x 125mm duct and splits it into 3x 100mm ducts. I printed mine on a Bambulab P1S using Polymakers ASA with 5 walls and 10% infill. If you…
Vzhledem k cenám v hobymarketech se vyplatí mřížku vytisknout i při ceně filamentu kolem 500kč za kg. Snad to někomu pomůže. Lze tisknout bez podpor, jen středová výztuha je vizuálně horší, ale přes mřížku to není moc vidět. Tisk : PETG…
Kazmar's bearing: https://www.printables.com/model/587056-ptfe-tube-bearing-608 since the spool holders don't have much load, these PTFE bearings work great
Es handelt sich um eine Wandhalterung für 125mm Trennscheiben etc.
A boot for the 64oz Iron Flask, 125mm ID, printed in Bambu TPU 95A HF. Printed with 3 walls and 15% hexagon infill. Prints fast, uses little TPU, works like a charm and fits perfectly.
I designed this sturdy container for storing 125mm angle grinder discs, the discs slides securely onto the spindle in the middle and can be viewed from the opening on the side to see what discs are stored inside. Use supports for the…
125mm pvc tube plug. Its all. Recommended to glue with pvc glue or similar
Ready for MMU. Print the partitions on their side with 0 top and bottom layers. I used honeycomb infill.
I added a version 2 with a less steep inclination for a cleaner overhang
These are my vise jaws I use on my 125mm vise. Printed in PETG and glued some 10mm x 2mm magnets to keep in place.
Stackable Orbit Sanding Paper Holder for 125mm (5") 8 hole Sanding Paper.
I needed to raise a square pot off the ground to help with drainage and avoid rotting roots. This has a 135mm x 135mm internal gap, with a 10mm wide lip on the inside. I'm just sharing in case anyone else finds this model useful. I've…
Adapter to connect 150mm (Mars Hydro Fan 6") and 125mm hose.
Lets you align the sanding disc with the base perfectly. You can also keep the applicator on the sander as a protector.
Little mouse for hand sanding with ø125mm disks. *) QnD: Quick and dirty
Držák je určen k uchycení brusných, řezných a brusných kotoučů o průměru 125 mm. Je možné potisknout střední trn nebo lze použít i bez trnu, například s těsněním. Držák lze umístit do skříňky na nářadí nebo do zásuvky. Dá se i…
The old holder for the cutting disks broke, so I had to reinforce the design a bit and make it more spacious.
Das ist mein Einbau- und Anschluss-Kit für einen Can 125 Abluftfilter. Der entlüftet eine growBox, die genau in einen alten IKEA-Schrank passt. Die Abluft wird nach aussen geführt. Der Filter wird mit einem Plastikflansch geliefert, den…
A hanger designed for suspending a funnel, ideal for keeping your workspace organized and tidy. It is mounted securely on the surface of a cabinet using strong adhesive tape, ensuring a firm hold without the need for drilling or screws.…
Passend für Multiboard, siehe https://www.multiboard.io Halter für Knipex 125mm Zangenschlüssel - 86 03 125 Halter für Knipex 150mm Zangenschlüssel - 86 03 150 Mounting for Knipex 125mm Pliers Wrench - 86 03 125 Mounting for Knipex 150mm…
This is a case to hold omnidirectional antennas and protect them while not in use. The case was designed around the TrueRC CORE 5.8ghz 125mm omnidirectional antenna pair. It uses four 8mmx2mm magnets for retention, but you could omit…
So this is my holder for abrasive disk i would recomend to print them with 5-10% infill. I have desing it if you could say so to hold 10x 125mm disks at a time.
V2 | Remodeled This tray has been made for more efficiency during sanding. This tray is for sanders with a ⌀ of 125mm with 8 hols. If you've suggestions or feedback, please let me know or comment below.
It is a simple, basic little tree stand for abekabakoff 's 125mm Christmas Tree print.
I liked my earlier design, but found it tricky to extract individual discs sometimes. This design removes that issue as it uses removable “drawers”. The drawers are held in place with 10Øx3mm magnets though these aren't entirely…
Remix to make a taller version of the original design for my use case. I crudely increased the Z dimension to 125% of original height, holding X and Y fixed. I include both STL and 3MF with a screenshot showing the height of the remix…
Remix of the "Transport box for Index cards A7", resized to fit cards with a 125mm width. Also added a dubble tear shape to the hinge, allowing for easier hinge-fillament-strand insertion. Uploaded both the A7 size with the teardrop…
As in the title. If it is round and around 125mm in diameter, this bin can store it. I have it with sanding disks (hence the labeled versions) Gridfinity size: 3x3x6, fits about 25 sanding disks. No magnet support at the moment, I needed…
This is a simple bowl with a modern looking spacer inside and it is 125mm in width and length.
Searching for an adapter for the Revopoint Miraco Turntable delivered with a Miraco Plus I found this model: https://www.printables.com/model/729494-revopoint-miraco-turntable-adapter It seemed at first that it has what was needed, but…
I designed it to fit the Ikea Molnart bulb in a HÅRSLINGA lamp stand, should fit other 125mm (GU125) bulbs as well. Gets hold in place by the bulb itself. Print settings I used 1.2mm Line Width (0.8mm Nozzle, with 0.4 you can go up to 0.8…
The rugged box providing a durable and practical storage solution. Its compact size and sturdy construction make it ideal for tools, gadgets, or everyday essentials. Dimensions: 125mm x 125mm x 62,5mm Material: PLA Nozzle Temperature:…
In de winkel was niet het juiste formaat te vinden, maar de printer wist er wel raad mee. The right size could not be fo.
In de winkel was niet het juiste formaat te vinden, maar de printer wist er wel raad mee. The right size could not be fo.
See the description of the original model.
Ventilator/Fan cover to your bathroom or wherever you want ;) Made for my ventilation system, for 125mm fan. I needed something with blocked ceiling airflow. Before you print it please check spacing between mounting points and their…
I Needed to hold foam insulation on a pipe. So this is my solution for it.
Added a .step file for modifying the dust port to your own dust collection system.
A vacuum attachment for the 125mm disc hand sander I remixed. It fits the Karcher WD3 vacuum.
I made some adjustments because the need for a 125mm sheet came up. I could not test it myself because I do not have a 125mm sheet. It should work but I will have to get an answer for that for now. I also made a version for Hex Lock Nuts.…
I don't know if it will match the original or not. You can write to us.
Lagerung von Schleifmitteln Lagerung ⌀125mm. Bitte im Slicer X und Y auf jeweils 100,3 skalieren. Dann passt es perfekt.
125mm Angle grinder dust cover for generic Angular Grinder
Easy to print may require a small amount of filing to fit the ball joint in. Have fun! MRC.
Prints with PLA just ok. Fits plastic 125mm pipes. Fusion file included. Use two M5x25 screws (or longer) to put it together. Use supports for pipe and handle, lid best printed vertically.
🟩 🟦 🟦 🟪 🟥 🟧 🟨 These models are butterfly valves for flexible 100mm, 125mm and 150mm pipes commonly used in ventilation. They are made to fit inside the pipes, and for you to clamp the pipes onto it from the outside. They print with no…
This accessory is designed for exhausting 3D printer fumes to an 125mm air duct, but still being able to use the 125mm air duct for other purposes (like cooking). One side is (1/3rd diameter) 123mm, so it fits in an 125mm air duct. The…
Compatible with festool sandpaper holder. Works with standard 125mm sandpaper
A simple holder for sandpaper 125mm diameter. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: PLA Notes: Print with a 0.4mm nozzle at 0.45mm line width.
Drawer holder for eccentric sanding discs. It is installed in a simple wooden housing. Schubladenhalter für Exenter Schleifscheiben. Der Einbau erfolgt in ein einfaches Gehäuse aus Holz. (Innenmaße: BxHxT = 144,2mm x 110,5mm x 148mm) See…
Mir wahren die Vorsatzluftfilter der Abluft für meine Wohnraumlüftung immer zu klein, deshalb habe ich mir selbst einen größeren Gemacht. Für G3 oder G4 Filterflies mit maximal 6mm stärke und einer größe von 22*23cm. Am besten selbst…
Assortment system 125mm sanding discs box organizers
I wanted a thick wall version of this vase so it will last (my mrs likes flowers! and this vase!) printed a spiralised version already, lasted 2 uses before it leaked so ive remixed it to suite 125mm tall 130mm wide 2.5mm walls top to…
I selected the sizes, glued an adapter for my air conditioner from two models. It is approximately 5" - 115mm inner, 125+-mm outer. Glued in the orca slicer. If you use Stl, you need to add "volume for subtraction" of 110mm\110mm\25mm,…
The PrintAirPipe servo valve can be used to block or regulate the airflow in the PrintAirPipe system. This is useful if, for example, you want to shut off a supply or exhaust air path. The control is implemented via an MG90 servo and an…
With the PrintAirPipe – 120mm Radial Fan Segment for the PrintAirPipe 125mm system, you can force-ventilate your PrintAirPipe pipe system. The speed of the built-in radial fan can be both controlled and read out thanks to PWM control and…
With the PrintAirPipe – 120mm axial fan segment for the PrintAirPipe 125mm system, you can force-ventilate your PrintAirPipe pipe system. The speed of the built-in axial fan can be both controlled and read out thanks to PWM control and…
125mm variante von https://www.printables.com/model/1278331-150mm-schlauch-vorfilter
Using the PrintAirPipe – 125 Air Sensor Segment for the PrintAirPipe System, it is possible to measure various properties of the air within the pipe system. For this purpose, a BME680, a BME280, and one of the available fermion gas…
The PrintAirPipe – AirFlowSensor Segment can be used to measure the airflow or air velocity in the pipe system. The electronics are based on an ESP32 S3 , three LEDs, and a Hall sensor. The entire electronics can be powered via a USB-C…
With the PrintAirPipe – 360° Intake Segment , it is possible to direct air within the PrintAirPipe pipe system to the outside or to draw air from the outside into the pipe system. The ventilation openings in the segment can be closed or…
With the two segments included in the PrintAirPipe filter set, you can expand your PrintAirPipe system with two different air filters. A 10mm thick activated carbon filter mat can be inserted into the compact segment for 10mm filter mats.…
With the PrintAirPipe – 125 Inch Adapter Set, you can connect inch-sized pipes to the PrintAirPipe . The exact dimensions are listed in the overviews below. You can find more information including a material list on my blog: Nerdiy.de Are…
This is a grate designed to fit in a 125mm beaker dish. It gives clearance above the magnetic stirrer
Magnetic Storage Box for Helios Preisser Micrometer 100-125mm: Details: Material: PLA Magnets: 4x5mm (8 pcs) Notice: If you need other box/magnet sizes, the Fusion 360 File is also ready for download.
This is a 3D-printed 125mm vent insert featuring a hexagonal grid pattern, designed for installation into round ventilation pipes or ducts. The honeycomb structure provides excellent airflow while maintaining structural strength and…
Gridfinity 2x4x3 Bin for Knipex 125mm Cutters 70 01 125
QBRICK SYSTEM TWO INSERT angle grinder 125mm cutting sanding discs also for 200 cases and XL organisers
Adaptateur pour tuyau de VMC 125mm vers 80mm imprimé en ABS ou PETG
A vent cover that will fit any 125mm vent opening. You can print it in PLA PETG ASA ABS PC PA
Spiral Planter Pot – 125mm Tall, 165mm Diameter (3 Versions) A modern and elegant spiral planter pot with a smooth, flowing twist design. Measuring 125 mm tall and 165 mm in diameter, it's ideal for medium-sized houseplants, succulents,…
This model allows you to align the dust extraction holes on your 125mm orbital sander quickly and efficiently. For ease of use, I recommend placing several sanding discs on the tool at once as it is significantly easier to remove the tool…
This box is designed to store angle grinder or circular sander discs. by default is 125mm of diameter and 5cm of height of storage. Also I've attached the freecad file with some parametrized sizes, so it's easy to adapt it to other…
Simple pipe reducer. Originally made to connect an extractor hood to a ventilation duct, but handy for all sorts of ducting setups. The extractor - 150mm outer dia. Duct - 125mm inner dia.
Material: PETG / ABS ________________________________________________________________________________________________________________ PETG: Sollte wegen der geringeren Temperaturbeständigkeit nicht in schwarz gedruckt werden. ABS: Kann…
