PrintAirPipe - 125mm Servo Valve by Nerdiy.de
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The PrintAirPipe servo valve can be used to block or regulate the airflow in the PrintAirPipe system.
- Rating
- 1 / 5
- Likes
- 11
- Makes
- 0
- Views
- 451
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Standard Digital File License
The PrintAirPipe servo valve can be used to block or regulate the airflow in the PrintAirPipe system. This is useful if, for example, you want to shut off a supply or exhaust air path.
The control is implemented via an MG90 servo and an ESP32 board. Both are installed on the pipe segment and powered via a USB-C port. The ESP32 firmware is based on ESPHome and can therefore be easily integrated into Home Assistant or other smart home systems.
The valve can then be closed, opened, or partially opened or closed from within the smart home system.
Using a touch switch built into the unit, the valve status can also be switched between open and closed directly on the unit. The current status of the valve is displayed via an LED on the unit.
You can find more information, including a materials list, on my blog:
- https://nerdiy.de/en/product-2/printairpipe-125-servo-valve-3d-printable-stl-files-2/
Are you looking for other offers for the PrintAirPipe system?
- You can find all available segments at