Counting matching models…
With this Air Guide for the Fractal North a 140m can be put in the lowest position an all the airflow is directed to the GPU Printed with front facing side down. I would recommend a brim or helper discs at the narrow parts.
Cooling Hood BigtreeTech Manta M8P v1.1 and v2.0 For CB1/CM4 with 60x60x15 Fan M8P. drivers with 5015 Blowerfan. And ziptie mountingpoints for esay wire wireing.
Update V4.2 Fits on my MK3s+ upgrade without any issues. hint!!! After replacing the heatbreak with an original e3D, we were able to print the material that never ran before. most PLA filaments works very well (many times printed over 20h…
Remix of the “Artillery Hornet - Air Conveyors for Cooling - New Improved Version V3” changing the mounting mechanism. The original had an overcomplicated mounting system that required more precision printing than the stock hornet is…
Remixed version that is compatible with a HDD tray mounted in the front position. The original model was too tall. I also made the side symmetrical with the front, added more chamfers for strenght and added magnets such that it mounts to…
Helps air move towards the GPU and not the bottom compartment. Magnets are press fit with shrinkage compensation. Otherwise might be too tight.
This is a collection of various Pipes and Bends for an extractor hood.
Do not use PLA. It can deform because the heat of the exhaust air.
This design is intended for a quieter "air assist" for multiple lasers. I designed it for a Sculpfun but it can also be used with other laser cutters. The best result is with an SLA printer or similar. I will soon add pictures of the…
A slightly asymmetrical 100mm square to circular airduct adapter 114x100x80mm
this part is designed so that it can be inserted in the cavity of the metal fan shroud, using the original screws. It's for when one (or both) of the metal flaps are broken off due to metal fatigue and you don't want to replace the entire…
A Y-shaped airduct splitter that smoothly transitions from 80mm to two times 100mm duct diameter. 219x100x262mm (some chopping / trimming might be required depending on the size of your printer)
OEM connector from Spiral venthose to window plate used three hooks which broke off. Made a new one which clips into those 4 notches in the circle instead or those three slots.
Following on from my fan mount for the Corsair Carbide 400r case, this model has mounts behind each fan for air ducts used to direct air directly to specific components i.e. enterprise GPU's which have passive coolers. The mount holes…
Cooling cover for the Manta M8P v1.1/v2 board, designed for motor drivers and the SoC. The system uses a 5015 blower fan to cool the motor drivers and a 60x60x10 fan to cool the SoC and the CB1/CB2/CM4 module. HW: - 6x M3 heatsets; - 1x…
Original model from https://www.printables.com/model/1074612-fractal-north-front-airduct-hdd-tray-compatible The Epoch has 17mm more GPU clearance than the North according to Fractal's website. So I extruded the front face by 17mm. It's…
Dimensions of collar: 78mm outer diameter at the tip and 76mm OD further down the collar to allow gripping duct with some band or other means. Screw holes are 5,5mm spaced 90mm apart in square formation. At the bottom there is a small…
So i found this model, and by comments noticed that the model would not fit onto the i3mks+ model, so ive remixed this and remade the model cover area so it fits onto the i3mks+ with room for the filament sensor. Printed in PETG .2mm but…
I needed some custom airduct tubes. I could not find any in the stores that I liked ( disled the flexible ones so made my own. You can make you own lengths and turns by connecting multipe ones. I also made a knee with a 45 degree angle.…
This is a first shot on building a bltouch adapter when using the spaceship partcooling duct on the E3D Hemera. You will need: 2-4 pcs: M3x6mm screws for attaching the modified frontplate to the Hemera 1 pcs: M3x12mm Screw + washer for…
All credit and thanks go to Chris Campbell for his incredible 5015-Cooling Solution! I remixed the airducts in tinkercad. The aim was to compress the stream of air further and to gain a little space, so I could use the magnetic…
Tools and Materials Needed (please give me a like) Goldshell Box II miner (KA box in my example) 140mm external fan (with screws included) 3D printer (e.g., BambuLab P1S) Filament for 3D printing Screwdriver 3D Printing the Air Duct…
