Fractal Epoch Front AirDuct
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Air guide for front fan to graphics card
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Original model from https://www.printables.com/model/1074612-fractal-north-front-airduct-hdd-tray-compatible
The Epoch has 17mm more GPU clearance than the North according to Fractal's website. So I extruded the front face by 17mm. It's still a bit of a loose fit, so like maybe another 0.5mm to 1mm would get it to friction fit with the front of the case. I had to use tape to hold it in place.
Edit: I just realised that the original design had the holes for magnets, but because I extruded the front surface out the magnets will obviously not work.
I also have zero CAD skills so there is probably a more efficient way to get it to fit with wasting less filament, but I am lazy.