Fractal Epoch Front AirDuct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Air guide for front fan to graphics card
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Original model from https://www.printables.com/model/1074612-fractal-north-front-airduct-hdd-tray-compatible
The Epoch has 17mm more GPU clearance than the North according to Fractal's website. So I extruded the front face by 17mm. It's still a bit of a loose fit, so like maybe another 0.5mm to 1mm would get it to friction fit with the front of the case. I had to use tape to hold it in place.
Edit: I just realised that the original design had the holes for magnets, but because I extruded the front surface out the magnets will obviously not work.
I also have zero CAD skills so there is probably a more efficient way to get it to fit with wasting less filament, but I am lazy.