1 / 11
22 and 25mm Wide Head Phillips Norelco Guard — image 1
1 / 11

22 and 25mm Wide Head Phillips Norelco Guard

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This fits the Phillips Norelco 9000 Multigroom series wide T-Head trimmer but it may fit others. I've been looking for…

Rating
5 / 5
Likes
5
Downloads
75
Makes
2
Views
863
Reviews
1

Updated at source:

Model information

Category
Bathroom
License
Creative Commons — Attribution

This fits the Phillips Norelco 9000 Multigroom series wide T-Head trimmer but it may fit others. I've been looking for one for awhile so I decided to modify a regular head and I needed to widen some and remove other combs/fins to make it strong enough to work. So I ended up printing mine out of Duramic PETG or in the future PCTG. I ended up printing it upside down with supports touching the build plate.

3000 series and 7000 series as well?

This is where the design started https://www.thingiverse.com/thing:4099410/

Because the longest guard with the kit is 19mm!

Notes:

I printed it upside down with fins up so I wouldn't have to clean support material out of them. I also used a small eraser block in Cura around the rear catch so I wouldn't rip it off when removing supports. I highly recommend doing this with a one filament machine!

I recently Printed it with normal supports using my Snapmaker U1 to print supports in PLA and the head in PETG.  And I have added a fixed version with an extended nub/catch/latch.  While the guard does stay on better you may need to put your holding hand thumb on the latch.

Tags