1 / 11
22 and 25mm Wide Head Phillips Norelco Guard — zdjęcie 1
1 / 11

22 and 25mm Wide Head Phillips Norelco Guard

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This fits the Phillips Norelco 9000 Multigroom series wide T-Head trimmer but it may fit others. I've been looking for…

Ocena
5 / 5
Polubienia
5
Pobrania
75
Wydruki
2
Wyświetlenia
858
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution

This fits the Phillips Norelco 9000 Multigroom series wide T-Head trimmer but it may fit others. I've been looking for one for awhile so I decided to modify a regular head and I needed to widen some and remove other combs/fins to make it strong enough to work. So I ended up printing mine out of Duramic PETG or in the future PCTG. I ended up printing it upside down with supports touching the build plate.

3000 series and 7000 series as well?

This is where the design started https://www.thingiverse.com/thing:4099410/

Because the longest guard with the kit is 19mm!

Notes:

I printed it upside down with fins up so I wouldn't have to clean support material out of them. I also used a small eraser block in Cura around the rear catch so I wouldn't rip it off when removing supports. I highly recommend doing this with a one filament machine!

I recently Printed it with normal supports using my Snapmaker U1 to print supports in PLA and the head in PETG.  And I have added a fixed version with an extended nub/catch/latch.  While the guard does stay on better you may need to put your holding hand thumb on the latch.

Tagi