Liczymy pasujące modele…
This is an adaptation of the Voron Stealthburner Printhead to be used with the hotend of Bambu Lab X1C/X1 The Bambu Lab X1C and X1 printers show an impressive performance and quality - using a special hotend. The performance of the hotend…
The rest of the files can be found → HERE ←, as well as a description of the necessary parts. The model is put directly on the filament slot on the printhead. Therefore, to change the filament, you will no longer need to remove the tube…
A flathead engine, also known as a sidevalve engine is an internal combustion engine with its valves contained within the engine block, instead of in the cylinder head, as in an overhead valve engine. The boxer configuration with two…
A flathead engine, also known as a sidevalve engine is an internal combustion engine with its valves contained within the engine block, instead of in the cylinder head, as in an overhead valve engine. Printing and Assembly The parts…
I remixed printheadcoverspare.stl by DuckDoCad and added a modified KingCobraHead AM09 from Tow4D.
A simple printhead case replacement for Anycubic Vyper. Main goal was to allow makers to “see” easily when the small strain gauge led is lit (to avoid print head crash into bed). Then I replaced stock air deflectors with wider ones that…
A flathead engine, also known as a sidevalve engine is an internal combustion engine with its valves contained within the engine block, instead of in the cylinder head, as in an overhead valve engine. Printing and Assembly The parts…
This version is printed in one piece and includes a receiver at the top for a PTFE tube. Installation: 1. Attach the filament sensor to its original plate. 2. Fit the sensor with the plate into the mount by tilting the sensor so that it…
I'm not as professional as OrzOrzOrz and therefore the model might not be as perfect as the original. As for the original, I printed it with the front facing down and used only support for the front fan base. A demo video if the Printhead…
Fit to Parts: Extruders: -Sherpa Mini -Hextrudort -LGX lite -HGX lite -Orbiter 2.0 -Orbiter 1.5 (see adapter plate) -Sherpa micro (see adapter plate) -Bowden -BMG like (see adapter mount) -Titan (see adapter mount) Hotends with BMO/V6…
I adapted the Elegoo Centauri Carbon Printhead Fan cover (credit: magedark) to utilize the High-Efficiency fan grille STL developed by Noctua (credit: Noctua_at). I'm not sure about any actual efficiency gains from this fan, but according…
Elegoo Centauri Carbon Printhead Fan Cover A bit loose but it can rotate when there is wind blowing from the layer fan <3
Modified the distance of the mounting holes for the hotend, measured my as 6,9mm, the original project is 6,5mm which is not perfect as it needs a tight fit. Added also a version for heatinserts M3.
This is a remix of Ibot_3D's excellent Voron Stealthburner printhead for the Bambu hotend. Changes include adding support for Filametrix, moving the wire path out of the way of the filament cutter, and tightening the slot for the hotend's…
Designed for a CW2 extruder. Other extruders may not work (untested). Required Hardware: 2x M3x12 or/and 2x M2,5x8 2x M3x16 6x Heat Insert You can either secure the hotend with the holes usually meant to screw the fan on (M2,5) or you can…
Designed a magnetic frontcover for the printhead, that can be used with the original Printhead without further modification (adapter required) and a version with a new base plate. I keep the original style and dimensions as good as…
Designed by: ericthepoolboy Hardware Kit and Build Support by MakerRx Before overhead valves took over, there was the Flathead V8 - raw, simple, and legendary. This 3D printable scale model brings that piece of history to life with moving…
Credit to the hardworking guys in the Voron Community for the Stealthburner https://github.com/VoronDesign/Voron-Afterburner/releases/tag/sb-beta0 Design is license under GPLv3 as per Voron license…
This modification is intended to carry over as much as possible from the stock Anycubic printer (Vyper Rev. C, Kobra Plus and Kobra Max), but to get an direct drive extruder and better part cooling. My target was to be very compact with…
Features: M3 threaded Inserts (ADXL spacing 15mm) Improved the heatbreak duct curvature for better airflow. Improved heat-break fan fitment + fan alignment (new). Improved LED PCB clearance/fitment Reinforced mounting lugs Hex Key access…
While waiting vzbot official printhead, I design a printed printhead modified from eva to have the same feature as vzbot alu printhead. adjustable fan height, QD2 support, CPAP Fan only, support orbiter 2, vzhextrudort, lgxlite, sherpa…
A simple EBB36 CanBus Board Mount with Cable Strain Relief for VZBot Printhead CNC V2 It has an elevated cable holder so that the can connector goes straight to the holder it also has 3 mounts for zip ties with a width of 2.5 mm It's…
Phaetus Dragon HF Mount for Stealthburner Why not use the P-DRG Mount? I just finished my v2.4 build, and my set had the HF variant of the Phaetus Dragon included. The obvious goto was to print and use the standard P-DRG mount since it's…
no supports needed, print it standing up or orizontal, you will need an M3 drill bit to drill 4 M3 16mm screws to fix the fan with the protection grille if you don't use the 14mmm protection grille if you print the one with brass inserts…
Note:The nozzle of hotend installation of modification based on V6 is around 1.5mm step out than the modification based on RevoVoron
Designed a magnetic backcover for the printhead, that can be used with the original Printhead without further modification. I keep the original style and dimensions as good as possible. Only the hole for the usb-cable is bigger, cause i…
Update (15.06.23) - Now works with the Orbitor, you will need to print Orbitor Bottom Back Brace Orbitor Filament Sensor Orbitor Top Back Brace Orbitor EBB Mount Update - I have added an additional version of the base (withgantrybase),…
UPDATE: the old design is not balanced, when the boat is lopsided it swings to one side... A new version is uploaded A small wind vane for small sailboats, I needed one for my Pouch Faltboot. It can be quickly attached and detached so…
Hello 3D printing community! The TZ-V2 hotend is a Bambulab hotend derivative that features a unique radiator allowing for both groovemount and Phaetus Dragon 4-bolt pattern mounting options. It's an affordable, high-flow hotend, and its…
Stealthburner remix of different design.
4028 Mount for VzBot F3d Racing RatRig CNC'd aluminum Print Head. 2 version, M3 nuts or M3 Heatset Inserts BOM: 6 x M3 nuts or M3 Heatset Inserts 4 x M3x35mm Bolts 2 x M3x25mm Bolts 2 x M3x10mm Bolts 1 x M3x8mm Bolt + M3 Nut/Heat Insert…
adaptor for neptune 4 plus for enclosed filament build
This is a remix of Jmperou's original (https://www.thingiverse.com/thing:5380573) design the only thing I altered was the screw hole circumferences so that I do not have to use threaded inserts. All of the sizes were adjusted to accept…
11.3.2023: Backplate fixed, small collision was there. Design is prepared for: MGN09H linear rail Rapido HF hotend Vz-HextrudORT extruder 40mm front fan Axial 4028 rear fan Euclid probe STEP file included. Design is prepared for V-Core…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
BETA The printhead brackets supplied at Github allows for pressure fit around the neck. However there is a tiny bit of wiggle in this mount but the Aliexpress version also allows for removal of the neck to expose M2.5 bolt holes. These…
A simple EBB36 CanBus Board Mount with Cable Strain Relief and PG7 mount for VZBot Printhead CNC It has an elevated cable holder so that the can connector goes straight to the holder it also has 3 mounts for zip ties with a width of 2.5…
I have modified the Afterburner Voron 2.4r2 print head for the Bambu Hotend. I am providing the front and rear printhead bodies only. For the adapter, see Sam Schmidt's design for the Bambu hotend. In addition, Mr Telip improved the…
Installation: Detach the filament sensor from its original location. Fit the sensor into the mount by tilting the sensor so that it snaps into the top tab of the mount and press to fit the tube from the plate. Screw the plate onto the…
( edit 20.03.23): updated version V2 available: fixes the shallow (top left) heatbreak insert. improved notches to allow the heatbreak fan to be inserted easily. set the heatbreak posts to be parallel at 15mm depth (wasn't on original)…
I recently switched to Voron Stealthburner toolhead from Voron Afterburner. After that switch, I started to experience clogs and I assumed the clogs were a result of insufficient cooling of the Dragon hotend. Despite using a fan that…
I quickly made this model based off of Hevort's Tentacool. It's not super tested yet so let me know what problems there are. It did require me to further restrict the CPAP duct to allow for the Beacon connector, but seems to work OK so…
Found this hotend in Aliexpress and bought, but when arrived, how mount in my Stealthburner setup? None info found about this chinese Frankenstein… Learned some CAD and solved my problem.
Fan cover for printhead pla+ first layer height 0.2 layer height 0.2 first layer speed at 30mm/s first layer acceleration 300mm/s
This is my Version "ONE" of the Printheadcover for a 3-Fan-setup. (4010 Radial Fan) My Neptune 2 reddit . A easy clean design for the Fan from Dust. Cable space on the right side. BL Touch cable holder. A non hot glue attachment for the…
For VZBot printhead or cnc version you dot need do any changes, but for Sapphire Plus 3D printer you need make some chages. All top cover need turn 180 degree around, my was from factory all ready bend and im not using it. Motor holders…
Accidently mis-labeled by afterburner head, and had requests for a stealthburner. Untested as hotend is installed in my afterburner - but has ~1mm clearance requires the V6 collar to be fitted. Nozzle should sit ~3mm below airduct Voron…
Previuous version have some problem on belt position, if you already download the previous version, re download again. I already fix the belt positioning deviation. Report any issue to github/vzbot discord or here. MGN9 only. Refer to vz…
9/4/22 - Added RatRig dock and 4mm offset variant.
Edit V2.1.1: Made little changes to the left mount to better fit the carriage screw. Removed some of the hex openings at the top because the fan housing sits directly underneath and so the openings are obsolete. I liked Marcin's good…
@9.4.2023 : Duct for Rapido UHF added Design is prepared for original VzBot CNC printhead and following hardware MGN09H linear rail Rapido HF/UHF hotend Vz-HextrudORT extruder 40mm front fan Axial 4028 rear fan Euclid probe STEP file…
Changed the wiring path to a backside U slot
I am the original creator of the VZ-BOT printed printhead, Using VZ-BOT alu printhead mockup I came up with this design, until Vez see my design on discord, then he message me if he can adopt it as the official printed printhead. And now…
This is a mount for using a 40mm fan in combination with the CNC machines VZ-Bot ratrig printhead. It's specific for using the Vz-Hextrudort and Rapido hotend. It is a WIP as I am still building the printead. STEP file is included for…
“Beavis, I have seen the top of the mountain, and it is good.” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my…
I really wanted to the use the extra Chaotic Lab CNC Tap V2 I had kicking around, but couldn't find a good way to adapt the AntHead to this carriage. I found the original model which somewhat worked, but there were areas that clashed with…
I cut down the anthead docks so that you could see more of the extruders.
Why this print head? Compact and efficient Fits on Ender 2 Pro and Neo series ( not for elder Ender 3 ) Support E3D v6 and Volcano hotends Slightly print volume losses: 165x160 for Ender 2 Pro Easy to print - no supports needed…
Hi. So i have an Ender3 V3 SE, it is my first 3D printer. I love it, but that print head cover, to me, is so boring compared to others, i had to do something about it. After some time of learning Tinkercad and printing prototypes i share…
Combined the Voron Dragonfly BMO Stealthburner printhead with files from the Filametrix project. Tested/working on my Voron 2.4R2.
Improved cable routing with cable ties
cpap duct for VZBot alu printhead with Quickdraw v2 by annex
a new Version of my T1H printhead design for the RatRig V-Core 3 using a MGN12 carriage and a billet main plate. Rapido, Beacon and Orbiter 2.0 on the comparison picture you can see a EVA printhead, T1H and the new T1H2 printhead short M3…
DTF Epson I3200 Printhead Cleaning Station. Printed in two parts. You can modify upper part if you need for different type of printhead. On places that cover connectors I put cover cut of heat shrink tubing. It is tight fit.
Stealthburner printhead for Phaetus DropEffect XG hotend
This strain relief was originally made to solve a fire hazard, namely the USB-C cable on the print head, during a print the cable moved a lot and could break free from it's housing causing the cables inside to become damaged and possibly…
I needed the stealthburner to fit volcano size nozzle and filametrix.
ABOUT & WHY: sure, this is just one of many printheads/fan shrouds/direct drive mods for Ender 3 printers but as I've used few of them and also wanted to upgrade my printer to direct drive, I found all the mods to be pretty big, heavy,…
Kobra 3 Lightweight Printhead V2 For those who are chasing less weight or just want to see the internal mechanisms Difference from the first version Beam thickness increased Diagonals added
I get constant clogging w/ my Dragon HF so this is my attempt to remedy the issue. I noticed that in the official Dragon printhead narrows the airflow considerably. This seems like a good idea to get the air to the copper heatsink where…
This is an Transmission 3 speeds extension for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). It's a complex remix of "1939 Ford Toploader Transmission by skipstitch" ( https://www.thingiverse.com/thing:2940612 ). It…
This is an Intake Manifold remix for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). This design is planned to receive a supercharger soon. Release 24/03/2020 : New IntakeManifoldPulleyV2 (it replace…
A Dragonfly BMS, Bl Touch and an Orbiter 2.0 are installed on the original CR-200B print head. To mount the Orbiter 2.0 I designed an adapter that is attached to the print head with 2x M3 screws (DIN 912). Threaded inserts M2 and M3 are…
This is an X-axis carriage project for Ender 5 Plus. The carriage allows you to install BMG feeder and V6 or CHC Pro hotend or other v6-compatible hotends. It is possible to adjust the vertical position of the extruder. My carriage…
A simple EBB36 CanBus Board Mount with Cable Strain Relief for VZBot Printhead CNC It has an elevated cable holder so that the can connector goes straight to the holder it also has 3 mounts for zip ties with a width of 2.5 mm It's…
ATTENTION! This is still work under progress! Since its working fine for me for serveral hours now, i decided to make a first release. If you find any problems / suggestions, please let me know! You need serveral Screws as well as 2…
This is an Engine Stand extension for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). The mounting holes are already present on the engine block. Print Settings 1 x EngineStandBackLeft : Layer:0.15mm Raft:no Brim:no…
The HD12MGN9 Tentacool Beacon duct by MirageC and sillysam71 has been adapted to decrease the y-offset. It has also been lowered slightly to fit my setup, please refer to the pictures. A suggested print orientation and support layout for…
Update 2025-11-24 - This model is tested and working but if you are using dtang's cover this implementation is WAY cooler I think. https://www.printables.com/model/1488590-combined-magnetic-top-cover-handle-with-core-one-v Update…
V4 of the printhead is out! https://www.printables.com/model/418000-poison-printhead-v4-twotrees-sapphire-pluspro update log: 06-12-2022: small change to the cooling duct because it was a little too close to the hotend. This is the…
Front part of the lightweight print head For mounting, use special supports (2 pieces) Removed LED
The base, figure and blank nameplate are provided as separate files. Print them in different colors and glue them together for the best effect. You can also slice the "Base + Ice Cream Fellow.stl" in Prusa which will add connectors.…
Printhead including BLTouch holder for v3 of the Lerdge iX
Looking for something truly bizarre, creepy, and impossible to ignore? Meet Hearthead – a grotesquely charming creature with the body of a crawling beast and the twisted grin of a nightmare. Perfect as halloween decoration or just a fun…
This is a new Timing Cover and the Distributor for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). This design is planned to receive a supercharger soon. The assembly of this part is meticulous; the components are…
This is an Oil Pan remix for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). Features : Gaskets Oil Pan remix (for Dispstick) Oil Pan Starter Flange remix (closed) Oil Pan Disptick Starter enclosure Print Settings 1 x…
This is a Cylinder Head Gasket extension for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). The gasket is glued to the cylinder head. More add-ons…
Support for sht36v2 mounted behind the stepper motor, To ensure that the PCB can be positioned behind the stepper motor I also modified some parts of the vzbot printhead. BOM: 2x spacer 12mm 3x m3x8 1x m3x6 1x insert nut M3 x 4
I wanted an easy to print dock that printed as a single piece (ok it's actually 2 pieces) with no supports and built in nozzle blocker. You will need: 2 - 6x3 Magnets - Highly recommend countersunk magnets 2 - M3x10(ish) FHCS for leveling…
remixed wing mount for V1/ V2 dummy 13 model. i made it look more close to original model of V1 from game ULTRAKILL created by Arsi "Hakita" Patala. Parts were changed to look closer to original model from ULTRAKILL and to be durable.
Ender 3 V3 SE/KE Filament Sensor Mount on printhead (PTFE Tube)
This is an add-on for Exhaust Headers of the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). Be careful ; ExhaustHeader1Collector and ExhaustHeader2Collector are not the same. Print Settings 1 x ExhaustHeader1Collector :…
I recently tested the Bambu Hotend on my VZ235 after hearing positive reviews about its performance. Since I primarily print technical parts that require high durability, strong layer adhesion is a key factor for me. Through my testing, I…
this mk8 mount is for people who wanna mount a mk8 on a vz printhead,you might ask why?well there are volcanos mk8 and they are actually high quality and with a cht nozzle and a 50w heater you can get flow of around 35mm3/s with a better…
Its a heavily modified version of the ingenious design from Vez3D, exclusively for the VCore3 with the stock MGN12C rail
This is a Crank Pulley remix for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). This remix only applies to the first version of the motor published by EricThePoolBoy. For the latest version, use the remix (two holes)…
Fell free to test it and GIVE any feedback or modification advice. I print it with 5 walls, 5 top and bottom. No need infiil like this cause it's full filled but small and low weight enough. For the adxl mount hole you can use both…
Just a small part to replace the original and show off a bit more :)
Praying Mantis is a complete Printhead for the following configuration: Sherpa Mini Extruder V6 Volcano Hotend 40mm Hotend Fan 5010 Part Cooling Fan BLtouch Sensor I did this Remix because the original Mantis was a much to complicated…
This model is based on the fantastic Gridfinity Bin with Printable Label by Pred . This has quickly become my go-to bin for organizing my hardware. The labels provided by Pred in the original model are a single object. You can print them…
![Ratrig Vz Printed Printhead [Beta][Untested]](https://media.printables.com/media/prints/379041/images/3182847_9094d9c8-64b4-4e48-818b-1a31c0cb11ba/screenshot-2023-01-24-063953.png)
