1 / 9
Tronxy X5SA V6 Volcano Printhead for Sherpa Mini - Praying Mantis
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Praying Mantis Printhead for the Tronxy X5SA Printer with V6 Volcano Hotend and Sherpa Mini Extruder + Bltouch Mount
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 136
- Wydruki
- 0
- Wyświetlenia
- 1608
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (35)Powiązane
Praying Mantis is a complete Printhead for the following configuration:
- Sherpa Mini Extruder
- V6 Volcano Hotend
- 40mm Hotend Fan
- 5010 Part Cooling Fan
- BLtouch Sensor
I did this Remix because the original Mantis was a much to complicated construction.
I also replaced many normal nuts with injection nuts (M3x5x4,5mm) for easier assembly.
It is designed for the original metall mounting plate of the Tronxy X5SA
Update 23.04.2023:
You can also use it with a Rapido HF and Rapido UHF Hotend.