AntHead Toolhead Chaotic Lab CNC Tap V2 Carriage Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A two piece adapter that allows for the use of an AntHead toolhead with a Chaotic Lab CNC Tap V2 carriage.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 220
- Wydruki
- 0
- Wyświetlenia
- 2229
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I really wanted to the use the extra Chaotic Lab CNC Tap V2 I had kicking around, but couldn't find a good way to adapt the AntHead to this carriage. I found the original model which somewhat worked, but there were areas that clashed with the bambu labs hotend I wanted to use. So, I remixed it to make it more suitable for my specific use case.
This design requires four M3x5x4mm heat press inserts. two in the bottom most holes of the top adapter and two in the bottom most holes of the bottom adapter.
It does require a specific order of operations when assembling.
First, the tap carriage must go on the linear rail. Then, you can mount the top adapter piece to the tap carriage. Next, the hotend mount must go on the tap adapter, using the non occupied holes that contain a M3x5x4mm heat press insert. Then the rest of the toolhead can be mounted to the carriage from that point. The last step is run a screw threw the bottom most hole in the tap carriage from the back into the bottom tap adapter that has been pre-attached to the toolhead.
Printed with standard Voron settings and support for the overhangs.