Stealthburner Printhead for Dragon HF
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved airflow for Dragon HF hotend on a Stealthburner
- Ocena
- 4 / 5
- Polubienia
- 14
- Pobrania
- 189
- Wydruki
- 1
- Wyświetlenia
- 1168
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I get constant clogging w/ my Dragon HF so this is my attempt to remedy the issue.
I noticed that in the official Dragon printhead narrows the airflow considerably. This seems like a good idea to get the air to the copper heatsink where it's needed. But in doing so, I believe it is unnecessarily restricting the airflow. Additionally, the stealthburner ducts push the air to the bottom where the melt zone is, not the heatsink. This might be causing the heater to run hotter to maintain the desired print temp.
My CAD skills are rudimentary and I only have a few prints on it so far. No clogging, but absence of evidence is not evidence of absence.
You have been warned. If you decide to use this, please let us know how it works out.
I also combined this print with https://www.printables.com/model/416006-enlarged-exhaust-ports-for-voron-stealthburner-pha/files which could arguably be more important in taking heat away