dingwall 5 string nut
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
replacement nut for Dingwall 5 string Combustion or NG2 Bass.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
it has a 9,45" radius (240mm), the slottet version is adapted for .045 / .065 / .085 / .105 / .125 strings and for my “low” playing purposes.
its a bit longer then it should be so it can be sanded down to the length needed.
i also recomend to sand the radiuses down a bit, looks better afterwards.
also the thickness is a bit lower, so it doesnt break of the fron wood due to thight fit!
i measured out the original one, and they have a string spacing of 8,5mm from middle to middle!
If it doesnt fit you i added the rough plank also.
not the most beautiful design (made quick and dirty on Tinkercad), but works fine.
ive printed it in ASA with 0,12 and 2 perimeters with archimedic infill at 100%.
now its time for “sience” which filament sounds best?
(eg tungsten, copper, PLA, wood etc)
ps: the last photo is the original one from Dingwall.