Liczymy pasujące modele…
For installing the remote bass knob from Rockford Fosgate (only tested for PLC-1) to your car with double sided tape (2cm) Print with (tree) supports as is. German: Zum Einbauen des Remote-Bassreglers von Rockford Fosgate im Auto mit…
I designed this scratch plate as a direct replacement to the original one. The original plate was scanned in 2d then imported into CAD where it was made into this design. This is in 2 pieces for the ability to fit onto a print bed - the…
i wish to abuse 18650s from 2011 and thus i needed to create this, i haven't tested it yet so not a clue if it works but i mean it should. I'll test it once i get my printer back.
A simple key rack that is usually hung by the front door. The rack is made with a silhouette of a basset in his favorite
The replica is only visual, made from photographs from the Internet and general dimensions. The housing can be used for your radio projects and/or projects on Arduino (taking into account the modification of the housing model for a…
Remove the PCB from the original remote and place it in the slide. Secure it with a zip-tie, so the friction of the slide locks it in place. The LED is behind 0.3mm of plastic, so the LED is dimmed, but still visible.
Designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
Description: This part was designed to replace lost or broken bass drum spur feet found on drums like Yamaha 9000/Recording Customs from the 80's. It was modeled from scratch using an original piece for reference. This part is 100% TPU,…
A perfect replacement for your lost or broken Tama Club Jam Bass Drum Spur Nuts. These are the pieces that help tighten the spur feet and secure them in place. This item is printed in black and is modeled similar to the original. PETG…
this is a sundown audio ZV.6 model that fits a bass knob dimension is 13,50 x 13,76mm for the cutout thats there know. if you scale it up or down ofc the dimesions will be diffrent so maybe use AI to use math to scale it to your needs.
Designed to fit my beautiful Fender Player Plus Precision Bass guitar without drilling any holes. It uses the scratch plate holes and hovers above the top screw of the precision pickup. Note the two holes are 103.5mm apart, and it is the…
This is a stopper for the Aulos 533b "Symphony" Bass recorder. It's supposed to protect the bore of the recorder (which is usually greased) from dust. Printing instructions Align "Y up" on bed (i.e. the wide base touches the build plate).…
Clamp for David Gage realist pickup to mount to the tailpiece. Nearly identical to the one that comes with it, if you want to make it a different color or if you need to replace it.
3D modeled to fit Gretsch Catalina series bass drums. Please see diagram for fit. PETG is recommended for printing! I have many drum parts available to download and sale if you would like to browse more of my items:…
Bring stage presence to your collection with this detailed Electric Bass Guitar model. Designed with a modern double-cutaway body shape, this sculpt captures the bold silhouette and functional layout of a classic four-string bass. The…
This standalone Smallmouth Bass statue features a sturdy, well-proportioned body with textured scales and realistic fins. No base is included, making it perfect for desktop displays, hobby collections, or freshwater-themed decor. Prints…
This standalone Striped Bass statue features accurate anatomical detail, including textured scales and flowing fins. Designed without a base for clean desktop, shelf, or hobby display. Prints in matte PLA with subtle FDM layer lines…
Works with Fanatec CSL Pedals (should work for regular brake, LC brake, and accelerator) and the following 4Ohm 25W Vibration Speaker . Each mount requires (2) M4x0.7x20mm screws and (1) M5x0.8x25mm hex bolt (with an 8mm head width and…
A headless bass guitar inspired by the Hexcore from Arcane. Designed for a 4 string, with a roller bridge travel saddle. Main Design Points: 2 soapbar humbucker pickups, 3 potentiometers spine reinforced by carbon fiber rods The insides…
These pedalboard legs aren't pretty (I might modify them later) but very functional and sturdy. I designed them based on my needs and a piece of wood board I had laying around. I like mixing materials when designing and building stuff,…
Bass reflex with minimal aeroport at the end. Designed for a 35L enclosure and a 10-inch speaker. Aeroport width: 80cm External width: 79cm Internal width: 77cm Total length: 162cm
This build was inspired by Nicolas Bras and his creaton of membrane clarinet with evenly spaced holes. This is not maybe that precise with tones, but it it based on same scale and tone progression he uses. For me best worked to just…
I tried designing and printing a few different versions of this pickguard from various templates found online, but they never really fit well. Could be minor differences in the Player series or something... who knows... But I just scanned…
Changed to Reverse P and also changed to single volume, no tone control. Changed the split location to hide better. If you use this pickguard you'll need to route the body for the new pickup location for the D and G strings. Best way to…
This is a simple shim to bring the speaker closer to the ear, more bass, more treble, loss of subtlety. The Z height is set to 3mm but you can adjust the z height in the slicer.. (remember to uncheck uniform scale) Anything more than 2mm…
Meet Geoff, he is friends with Jake The Squirrel, He is always hanging around with Axel and Jake and gets Angry and Drunk, He is a follower, not a leader.
A small holder/case for Sony MDRXB50AP/R Extra Bass Earbuds. Keeps cable from being easily tangled when carrying around. To wrap headphones around I find if you start with the aux end at the back and start wrapping around it works best. I…
Designed for 2s GNB 650mah LiHV batteries. The ones with an orange wrapper and flowers. Slightly bumper this away from the base plate as my flight controller has the motor connectors coming straight from the bottom, so I needed to give…
Version 2.0 files available! Key differences: M3 mounting points for a more sleek printed handle at the top of the speaker Barrel jack for power and mounting points for a battery holder at the back JAB4 now mounts to the access panel for…
Onshape project link . Hook rings for Halo BassiNest and BassiNest Luxe. The Luxe bar diameter is 2mm larger, that's the only difference. LH: 0.2mm Infill: 30% Gyroid
This is a replacement wheel assembly for the Love n Care Dreamtime Bassinet. Designed for use on carpet and are a direct replacement for the original wheels. Print with minimum 3 layers. .2mm layer height works well. Dont go lower than…
This is a little box designed after the knobs of my electric bass . Good for musicians to store picks, earplugs, legal plants, etc. The top cap is screwable and 2 different types of lids are included, one plain with rounded edges ( the…
A basset hound magnet for your refrigerator. 2.31" x 1.7" x .25" Cavity in the back for a ½" x 0.20" magnet that can be glued into place.
Hi there, We purchased a mobile for our baby and found there was no way to effectively mount it on the bassinet. So I took it upon myself to design a new mount for the bassinet. It works brilliantly and is easy to install. The pole 3mf…
1.2mm thick guitar pick with a small bulge in the top for ergonomics.
Upper holes are bored with Hümmelchen proportions to show if semitones are still possible on this chanter length. Some corrections in spacement are done but it based still on the bass chanter of the Sordellina in F. Sordellina Bass Reed…
A thumb rest for the SUB Ray 4 to rest the thumb where the neck pickup of a Fender Jazz Bass would be.
This bass clarinet to bari sax adapter is just for fun. It works especially well when used with the Avatar Mojo Fave Bass Clarinet Mouthpiece (thingiverse thing:6576772). You will have intonation issues so don't use this to play music…
A Basset Hound head on a duck. You can use these for Jeep or cruise ship games or whatever. The original Basset Hound was leaning a bit to the side and I didn't correct for this. I guess you could say the Basset-Duck is tilting the head…
I needed a replacement hinge for my bass hound boat so I went to Fusion 3d to create
04.02.25: Part 3 & 4 are now added without the finger grooves. 16.02.25: Part 2 with new Windway design is added. 14.04.25: The windway on the alternating part is now a bit less deep for a lower need of air, the holes 5# and 6# are quite…
To replace a missing Pearl Bass Drum Foot. I happened to have the right tap and gave it a run through. Spun right on after. Category: Music
Description: This part was designed to replace lost or broken bolt stoppers (CNR903 & CNR904) on TAMA Iron Cobra double bass drum pedals. It was modeled from scratch using an original piece for reference. Compare to: CNR903 & CNR904…
Contrabass Drone Flute in F inspired by the work of Miguel Medina and based on the parameters from https://www.flutopedia.com/ First hole of the lower hand is turned backward because the finger spacing. 16.02.25: Part 2 with a improved…
For installing the remote bass knob from Rockford Fosgate (only tested for PLC-1) to your car with double sided tape (2cm) Print with (tree) supports as is. German: Zum Einbauen des Remote-Bassreglers von Rockford Fosgate im Auto mit…
5 string multiscale bass. Scale 36.5-35" Neck and core are made of wood and glued together. Neck is asymmetric. Side channel in neck is for installation of COB LED strip. Cutouts for LEDs to shine are filled with clear UV curable acrylic.…
V3 UPDATE 11/12/24: Added reinforcement across the whole lip. ------------------------------------------------------------------------------------------- V2 UPDATE 25/10/24: Due to excessive clatter on the 8020 profile, I've added a…
Description: These parts were designed to replace lost or broken bass drum spur feet and nuts. They were modeled from scratch using a set from a Pearl Export bass drum. The threads have been slightly enlarged to accommodate 3D-printing…
Allows for mounting an Aurasound or Dayton Audio bass shaker on extruded aluminum. My shakers have holes for M5 bolts, and I used M5 heat set inserts to hold them in place to the mount. I've included STLs for both M5 and M4 shaker mounts,…
Thumbrest/tugbar created to replace the modern hollow-feeling fender part. This is not an exact copy of the Fender part, but it keeps the 29mm hole spacing that was present on my vintage Jazz Bass. Probably best to print with 100% infill…
The mount is designed to be attached to Aluminum extrusion profile 4040 via couple of M6x20 bolts (18mm M6 washer recommended), 4080 via 4 M6x16 inbus bolts or under Fanatec CSL Pedals, directly under brake pedal via couple of M4x40. 2 M4…
Demo: I wanted to design a portable bass that would be inexpensive and at the same time easy to print. I have a Creality K1 (22x22x25) so can’t print the core of the bass in just one part so had to print in 2. I used 2 40cm 8mm metal rods…
This is a replacement for the metal pickup cover for Fender Jazz Bass (just like the one on the Marcus Miller signature). If printed on one side (0.25 mm layer height will work) it will take less than 1 hour to complete.
Use some plastic foil, onion skin or kazoo membranes on the holes for the buzzing sound.
This can be mounted on profile extrusion 40x80 Holes for M6 screws. For the bass shakers , use m4 and threaded insert or just m4 nuts.
print exactly how it loads no supports PETG 15% infill for cutter Pla 100% infill for plate will possibly do more
Wanted to have a thumb rest on my P Bass but I didn't want to drill a hole for it. Modified an existing thumb rest file to only have one screw hole. Print: PETG 3 Walls 40% infill Optional: I wanted it to look smooth. So I took some…
Designed this to allow for mounting of 100mm bolt pattern bass shakers, like Dayton Audio BST-1, to NRG bucket seats without the need for drilling. This mount takes advantage of the seat bottom harness pass-through hole. Tolerances allow…
Made a clip for my Cali76, didn't want to use Velcro or dual lock on this. Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Prusament PC Blue Notes: Any material does the…
Hello everyone! I designed these 3D-printed supports for 30 mm diameter springs, intended to isolate the seat, enhance the performance of the bass shakers, and minimize vibration transfer to the rest of the simulator. The 3D support…
no description needed, so easy to print flat - I added the headstock so that you can print it and glue it to the main body to have a different color
I was looking for cup holders for our drumline, and I was unable to find them anywhere. So I decided to design some! I used this foam tape and cut it in half once applied to the inside of the clip.
I printed it in ABS for better strength and durability.
I designed this scratch plate as a direct replacement to the original one. The original plate was scanned in 2d then imported into CAD where it was made into this design. This is in 2 pieces for the ability to fit onto a print bed - the…
I designed different add-ons for the Bassel (Bâle) Swiss tram designed by Small parts at https://www.thingiverse.com/thing:5374263. You will find black doors and windows contours, gray plating for the top car equipment, white stripping…
i wish to abuse 18650s from 2011 and thus i needed to create this, i haven't tested it yet so not a clue if it works but i mean it should. I'll test it once i get my printer back.
ISSB | Speaker Box for Smartphones - t he ISSB - i Phone Sound Subwoofer Bassreflex - Docking Station is a compact subwoofer that will amaze you with its surprisingly precise and punchy bass. It might be small enough to discretely tuck…
My Bassett furniture sofa has these small plastic feet underneath the wooden legs. Recently while moving, two of the feet snapped. I couldn't find replacement parts online, and Bassett was unresponsive, so I decided to model the feet and…
🇳🇿 Nau mai, haere mai ki Aotearoa New Zealand! Welcome to Aotearoa New Zealand! The Embassy Theatre is a cinema in Wellington, New Zealand. Originally built in 1924, it has undergone a series of remodelings and changes in ownership…
I needed some radius gauges to figure out what to set my guitar's action to. I found there were none on Thingiverse, so I decided to make my own set. The gauges are in inches as that is how guitar fretboards are measured. Since these are…
If you are interested in this product, you can search for this code on Amazon: B0DQVBH1NB Youtube:bMESK551y4g
Make your own livewell plugs using these parts. The fastener is a stainless steel #6 x 1.5" sheet metal screw. You might want to apply a thin coat of silicone during assembly to close off the internal leak path and ensure a good seal.
Hi Internet Sim people... This one is a request by kakemiks on the Simhub discord channel. It's a test model but have a go printing one and leaving feedback. This is for the Sinus live Bass-Pump III Shaker…
A simple key rack that is usually hung by the front door. The rack is made with a silhouette of a basset in his favorite
A Simple Bass Finger Ramp for my specific bass guitar measured 60x107x9.5mm The width is 60mm in between the two Bartolini Mk 1 pickups. The 9.5mm height might be a little bit too high for some people but just make your own adjustments.…
This is a bass drum riser for a 14" bass drum such as the one included with the Tama Club-Jam Flyer kit. The OEM riser for that kit (part #BLLJ) does not seem to be available anywhere, so if you lose or break it then this should do the…
Bass Guitar Support I needed a bass guitar support as you can see in the pictures so I decided to make my own in Fusion360 sofware. Im uploading the model files in case you do some upgrade. Thats version 0 and its working well for my bass…
Bassreflexrohr 70mm Außendurschmesser / 100mmx100mm Flansch / 200mm hoch
Love music? Use this button to make you smile. An upside-down bass clef makes a smile! :)
Based on Tiddley earpads bracket, closed the holes, this bracket is made and recommend to use with Tiddley Fazors but they are optional (use double side tape on the magnets holder not on the magnets). Boost sub bass, bass and reduce a…
BASS B reak A ction S hell S hot Technically overview -Metric hardware -k25 spring -same tube as SLAB -low hardware build -Sillyshell -prime on close The BASS is a nerf blaster that shots Sillyshells. It is a break action blaster that…
O-ring for liftable coffee table (French : Joint torique pour table basse relevable) model used : Table basse relevable UP & DOWN Print Settings Supports: No Resolution: 0,18mm Infill: 100% Filament: tpu Category: Replacement Parts ------…
