1 / 8

GUITAR & BASS WALL MOUNT

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

New guitar wall mount bracket for guitars and other stringed instruments.

Aktualizacja u źródła: 2 kwi 2025

Informacje o modelu

Follow me for more upcoming designs :)

Description

Guitar or Bass Guitar Wall mount

IDEALLY FOR SYMMETRIC GUITAR HEADS (Fender strats etc will fit but you may get a slight tilt due to the headstock geometry not being symmetrical)

2X Options for slim guitars and thicker guitars like acoustics. Option B is offset another 7mm from the wall.

hidden Screw Design. Fix bracket to wall, then slot mount over

43mm and below necks

- MUST print bracket laying down so layer grain runs the length or the bracket

MUST print the mount standing up. If not, I can not guarantee the strength of the part.
0.2 layer height
Minimum of w wall thickness
30% triangular or Gyroid infill
With the holes, PETG Would be best, but PLA should be strong enough
See the image attached for hole dimensions. I used M4 Screw. Approx 40mm in length
Use suitable wall fixings to avoid failure.