1 / 8

GUITAR & BASS WALL MOUNT

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

New guitar wall mount bracket for guitars and other stringed instruments.

Updated at source: Apr 2, 2025

Model information

Follow me for more upcoming designs :)

Description

Guitar or Bass Guitar Wall mount

IDEALLY FOR SYMMETRIC GUITAR HEADS (Fender strats etc will fit but you may get a slight tilt due to the headstock geometry not being symmetrical)

2X Options for slim guitars and thicker guitars like acoustics. Option B is offset another 7mm from the wall.

hidden Screw Design. Fix bracket to wall, then slot mount over

43mm and below necks

- MUST print bracket laying down so layer grain runs the length or the bracket

MUST print the mount standing up. If not, I can not guarantee the strength of the part.
0.2 layer height
Minimum of w wall thickness
30% triangular or Gyroid infill
With the holes, PETG Would be best, but PLA should be strong enough
See the image attached for hole dimensions. I used M4 Screw. Approx 40mm in length
Use suitable wall fixings to avoid failure.