1 / 3
BASS tin whistle (in A)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
(very) low pitched tin whistle
- Ocena
- 0 / 5
- Polubienia
- 230
- Pobrania
- 207
- Wydruki
- 0
- Wyświetlenia
- 6886
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (14)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (263)Powiązane
video of it working comming soon
stuff needed:
75cm(can be different to make different pitch) long tube (ID-46mm OD-50mm)
1,5m long M4 threaded rod
48 M4 nuts
1mm thick rubber sheet (or any other air tight flexible 1mm sheet material (I used felt and it didnt work))
step drill
saw
sandpaper or file
before building I highly recomend read to see how to drill holes, how whistles work and to understand this more in general https://www.guidogonzato.it/whistle/
how to build:
- line the tube
- make the opening(on the opposite side of the line)
- sand down the fipple (yes it is called fipple)
- insert “inner.stl” and “outer.stl”
- mark spots for holes
- glue 6x “valve6.stl” along the line (bottom ones on right, top ones left(see pictures))
dont forget to drill hole - assemble valve caps from 2x M4 nuts + “ValveCap.stl” + 2x (one mirrored) “LinkShort.stl” and “LinkMed.stl” and “LinkLong.stl”
repeat 2x until you have 6 valve caps
and glue rubber(or any other sealant you choose - glue “KeyHold1” “KeyHold2” and "KeyHold3" (use your threaded rod to aling them)
- assemble keys from “Key.stl” + 2x M4 nuts + 2x (one mirrored) “KeyLinkShort.stl” and “KeyLinkMed.stl” and “KeyLinkLong.stl”
repeat 2x until you have 6
- assemble
