1 / 10
PrusaV - Bass — zdjęcie 1
1 / 10

PrusaV - Bass

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Flying-V style Bass

Ocena
0 / 5
Polubienia
47
Pobrania
190
Wydruki
0
Wyświetlenia
1638
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial

Have you ever wanted to print a Bass?  How about a Flying V style Bass?  Maybe one with a Hex wing?  Look no further!

Slicer Settings

The PrusaCaster recommends using at least 7 walls, top layers, and bottom layers, as well as 25% infil for a basic guitar.  For my print of this, I used 15% infill globally, and then modified the center of the guitar to be 25%, and made the bridge and neck mount points 100%.   I have attached a .3mf file of this. 

This is a large print, and It was designed for a large printer; specifically the Elegoo Neptune 4 Max .  You will need to slice it up to print it on a smaller printer.  If anyone does this and builds it and has success with it working, please send them to me 

IMPORTANT NOTE: Make sure you get the Body file to match the Neck plate you purchase.  If you choose the salvage option, use the “Glarry” Body file.

 

Parts List: 

Build Your Own:

Salvage

You can buy this bass and take it apart to get all of the pieces you need besides the screws for the control panel access

https://amzn.to/49gHzO0 

Sources


Heavily Influenced by PrusaCaster and Prusacaster 2077 but designed from scratch. 

Tagi