Kickport for bass drum
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this Kickport in Fusion360. The inner diameter is 4.25 inch, the outer diameter 6.25 inch and the total…
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 352
- Wydruki
- 0
- Wyświetlenia
- 1137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this Kickport in Fusion360.
The inner diameter is 4.25 inch, the outer diameter 6.25 inch and the total length is 4 inch.
To apply it you need to cut a hole in the drumhead with a diameter of 5.5 inches (140mm) before you mount it on your bass drum.
Update 12-10-2023
I used it a while now on my bass drum. I had to add double sided tape on the flange and swivel to prevent loosening due to vibrations. Works fine now!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.28
Infill:
20%
Filament: Esun PLA+
black
Category: 3D Printing