Liczymy pasujące modele…
I thought about this holder, because its very anoying wheter you want to play drums an cant find any of your sticks. There are two ways to use it correctly: Using the bottom stand Mount it on the wall with a screw The version you can see…
Wydruk około 8,98 €–10,98 € nettoWstępna wycena jednego wariantu
This is a wall-mounted version of the tabletop model I have made before, there are 2 backplates for mounting, one to put the screws through, and one with hidden slots for countersunk screws
I created a series of small boxes for holding stuff inside my toolcase I use as an event technician. This box contains some small drum equipment: DrumKey Cymbal proctection sleeve with some felt CymbalNuts These boxes fit the inlay of my…
A jam block pad for electronic drums. [PT] Um pad de jam block para bateria eletrônica. Print Settings Printer Brand: Anycubic Printer: Kossel Rafts: No Supports: No Resolution: 0.4mm Infill: 23% Filament: Material 3D / National PLA / TPU…
Drumstick holder. Snaps onto the leg of the AODSK AED-400 electronic drum kit, or anything with a 38.2mm leg diameter. 200mm tall. Printed on MK3S+ with Prusament Galaxy Black ASA. 0.2mm layers, 10% infill, no rafts/supports
I recently got a set of drums for my grandson and then decided to get a set also so we could learn together. Seeing he is a lefty I needed 2 separate sets then realising I had nowhere to easily store the drumsticks I designed a simple box…
The model design is scaled to 10% for printing, which is what I would recommend. Printed on a Creality K1C. 10% infill,
I have Roland V-Drum TD-07KV, frame post diameter is roughly 38.15 mm. So I didn't know other Roland post sizes. So please measure before printing it. Printed with eSun ABS+ without Support. Between 20% and 40% infill is more than enough…
I designed this bookmark to go along with a gift I am giving to a relative, a drumming book no less. It hasn't arrived yet so just a Pi book as an example in these photos :) You can add initials in the slicer for whom the gift is to!
Richards Makes 3d Printed Drum System. These drums would make a perfect addition to any drummer's arsenal. Sizes include 6in, 8in, 10in, 12in, and 13in. Also Each drum can use a standard drum head or mesh drum head. (Or if you’re feeling…
A great Wall Art of a drums beat. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) I used Flux.1 AI, Copilot and Hotpot
Drumstick Display – 3D Printable This drumstick display is designed to showcase your drumsticks in a clean and organised way. Perfect for displaying favourite sticks, signature models, or special editions, it keeps them visible and neatly…
A custom drumstickholder to fit your drumsticks into a ring binder. Designed for 5A sticks. Other diameter possible, see the step file or just dm me.
A tiny tweak to the original design, if you have issues with catching your oring or lots of jamming on your superdrums, try it out! Easy operation in Tinkercad, so if you need a different neck for a SuperDrum70, it should be a quick and…
The render shown here has the drum head hidden to show how the hoop rests on the mount body. I printed both in PETG at 0.20mm layers, 3 walls and 15% infill. Mounting with 2" drywall screws. I used tree supports on the bed only to help…
An anti-slip cap for my drum set so that it doesn't move when I play it.
beefed up version of the original. made the walls a bit thicker to increase the clamping force
Print upside down as per the original, adding support for the drumstick holder holes. I printed mine with slight fuzzy (bumpy) skin for some texture.
Attach your drinking bottle without it getting knocked over and spilling on the carpet. Prints as-is with no supports. Default model should fit any NRW/Euro bottle and will attach with zipties to a 40mm diameter vertical post.
Treat your pup to a feast-worthy favorite with this delicious chicken leg snack 🍗🐶 With its rich, golden-brown look and satisfying shape, this treat feels like a true reward — hearty, comforting, and impossible to ignore. It’s the kind of…
I created a series of small boxes for holding stuff inside my toolcase I use as an event technician. This box contains some small drum equipment: DrumKey Cymbal proctection sleeve with some felt CymbalNuts These boxes fit the inlay of my…
The gathering of all my work from over the past few years. Some are completely functional, some have never even been printed. I tried to relay which ones in the file names but i may have missed one or 2. Feel free to ask if you are…
This drumstick holder is designed to tidy different types of drumsticks, in this case is used in a school music to help the students when they forget their drumsticks ;) Must be printed in vertical with supports for the lower part!
Printed with PLA and a 0.12mm Layer Height. Infill of 15%. No supports needed.
Simple holder for drumsticks fitting the Roland V-Drums series
I have Roland V-Drum TD-07KV, frame post diameter is roughly 38.15 mm. So I didn't know other Roland post sizes. So please measure before printing it. Printed with eSun ABS+ without Support. Between 20% and 40% infill is more than enough…
drumstick holder for a practice pad (19mm) and 5A and 5B sticks
Drumstick experiment. I modeled this after the Vic Firth Freestyle 55a drumstick. Printed flat with supports. Layer height: 0.12mm Perimeters: 12 Cubic infill: 100% Total estimated filament for a pair of sticks was 178.11 g These sticks…
Because I drop drum sticks a lot, I made this drum stick holder. It holds 24 + 2. I can the freely drop drum sticks as I practice, and pick them up when I'm finished, instead of during a song. Good times. I only printed the 24 + 2 because…
drum stick holder for 1.5 cm thick sticks. uses 2x10 mm magnets. use support for better quality.
The stand is made out of two files, one is the stand itself, and a tube that is glued to the bottom of the stand, so it can rest ontop of the structure of the drum. It fits perfectly on my TD1-DMK. I haven't tested on other drums, but it…
To be as close to “food safe” has possible, I recommend printing with PETG or PET filament that has been tested to FDA standards for food safety. Print only with a stainless steel nozzle and on a glass print bed.
I've designed a simple clamp to move Roland Module to different location to make e-drums even more compact. 2x M4 screw + 2x M4 nut is necessary
Hi Folks, This is a simple model of phone / tablet holder for Roland E-Drums. Fits my TD07-KV. 1x M4 Screw is needed to fix two parts
This is a simple Clamp that allows to mount a 16mm pipe (from cheap pad stand) as a note/smartphone holder requires 2 x M4 nuts and 2 x M4 screw (8mm is fine) PRINT USING TPU/FLEX
English Version (print details below) Given that clips are no longer produced and have become horribly expensive for a few grams of plastic, I thought it would be useful to model them. I modeled the two clip types (normal & winged) to…
The bucket fits in both 2800 lid types (one model requires you to push the bucket into the lid, the other requires you to turn the bucket in the lid to lock it). The bucket works as expected. If you want change something, I put my .F3D…
Ludwig USA Drums light box for the drum lovers out there. This was the older logo that an old drummer asked me to create so I thought I would share. Just add in some LED lights and watch it glow……. Note there are no lights in the model…
I didn't see any stick holder prints that could hold many sticks for easy access so here goes. Just ziptie it to your kit and cut off the excess tie and your done. Just print it upside down, no supports needed. I made it for small…
These are a mini rockband drums, it is a first version and needs a few small changes
Designed by Charles C 2024 #002 Drumstick Holder to keep drumsticks neatly bundled together when carrying them around. Fits with 7A/5A sized sticks - insert down from the tip of the drumstick along the tapered shoulder until fit is snug.…
I designed this bookmark to go along with a gift I am giving to a relative, a drumming book no less. It hasn't arrived yet so just a Pi book as an example in these photos :) You can add initials in the slicer for whom the gift is to!
This is a model of a little drumset with a drum and some drives. There is a “Playing stick” that lets you play both drums and drives with one hand. Also, this “Playing stick” was taken from the model thumb drum in Printables and modified.…
These satisfying holders snap any drumsticks into a snug wall mount. Print settings: Infill-15% No supports Layer lines- .20mm I found ABS works best but any other filament works fine. One printed mount to the wall anyway you like Brad…
English below! Trommeltritt für Kabeltrommel - die ideale Hilfe beim Aufwickeln. Einfach die Trommelstufe am Rahmen befestigen und los geht's. Mit dem Kabeltrommel-Zubehör fixieren Sie Ihre Kabeltrommel auf dem Boden und erleichtern so…
Drumstick holder with two more diameter. 22,2 mm and 19,2 mm. Thanks for the original one ! https://www.printables.com/model/465248-drumstick-holder-2-pair-no-support-easy-print
Drumstick holder for Ikea Milsbo cabinet Remixed from : https://www.thingiverse.com/thing:3703309 and https://www.thingiverse.com/thing:440988 Category: Music
The Overheat Drum Belt Holder is a belt carrier for drum mags like the Overheat drum. It uses a catch and release similar to a magwell to ensure that the drum only comes out when wanted. It works with any talon-sized magazine with a…
This is a crow shaped drumstick holder that I designed to proudly display a set of drumsticks of my wife's favourite band, the mighty THOSE DAMN CROWS. (#crowfamily). The design prints flat on the bed with no supports needed. There are no…
Richards Makes 3d Printed Drum System. These drums would make a perfect addition to any drummer's arsenal. Sizes include 6in, 8in, 10in, 12in, and 13in. Also Each drum can use a standard drum head or mesh drum head. (Or if you’re feeling…
Drumstick holder replacement for guitar hero world tour drumkit.
A great Wall Art of drums. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) I used Flux.1 AI, Copilot and Hotpot
After seeing all the other awesome entries into the contest, I couldn't find any drumstick beads so I designed up 4 different variations. 4mm diameter holes 4mm diameter holes with 7mm recesses in the head for a knot 5mm diameter holes…
Another pretend play kitchen protein to add to the collection- chicken! Flat on the back for ease of printing and playing. Filament colors used in photo- Panchroma Starlight Jupiter PLA and Polyterra Muted White
A great Wall Art of drums. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) I used Flux.1 AI, Copilot and Hotpot
A two-part drumstick holder for vertical 1.5" (38.1 mm) drum rack tubing. The inner diameter of the holder cup and ring is 5 cm (2"), so it can hold 4 drumsticks ( a bigger version for 6–8 drumsticks is available here ). It clamps onto…
A two-part drumstick holder for vertical 1.5" (38.1 mm) drum rack tubing or any vertical tube between 20 and 45 mm. The inner diameter of the holder cup and ring is 7 cm (2 3/4"), so it can hold 6 to 8 drumsticks ( a smaller version for 4…
A great Wall Art of a drums beat. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) I used Flux.1 AI, Copilot and Hotpot
A great Wall Art of a drummer. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) I used Flux.1 AI, Copilot and Hotpot
This battery cover is simple, I was able to print it standard quality on my Ender 3 with supports and had no issues.
3D modeled to fit inside Ludwig Classic drum lugs. Please see diagram for fit. PETG is recommended for printing! I have many drum parts available to download and sale if you would like to browse more of my items: https://www.drumstash.com
3D modeled to fit inside Ludwig Classic Mini drum lugs. Please see diagram for fit. PETG is recommended for printing! I have many drum parts available to download and sale if you would like to browse more of my items:…
Ergo drumstick for babies or toddlers, good for xylophones and other percussion type children's toys. * Add Modifier to tip for 100% infill for best sound.
Plastic bushing for old Mapex drum hardware. For cymbal/snare stands or drum thrones.
Made to fit in the holes of Yamaha or similar hardware. Hole should be compatible for 7/8" pipe.
A perfect replacement for your lost or broken nylon Pearl Cymbal Stand Bushings. This fits a 7/8" size tube. Do not over-tighten! PETG is recommended. Update: I had reports that the 7/8" model wasn't working for a snare stand a customer…
Ludwig LARGE Bowtie lug compatible drum lug insert. This was modeled after an insert that was found in a large (3-7/8") bowtie lug. Ludwig Classic lug compatible drum lug insert. This was modeled after an insert that was found in a…
Deutsch Mit diesem Modell können sie bequem ihr Handy in Sicht- und Greifbarer Nähe platzieren. Schrauben sie ggf. den Halter noch etwas fest. Für die vollständige Funktion müssen sie die Datei zweimal drucken, damit ihr Handy von oben…
A Stickholder for 5A Sticks or other Sticks with the same Diameter. The Holder is for a wall and can hold one Stick. The Stick is not completely immovable and you can easy make another Stick in the holder. When you want to use it you need…
This model is compatible with the lego system.
Hello, Today I have Drumsticks for you, Guitar Hero . The sticks are completely authentic to the sticks for the game Guitar Hero on Wii, PS3 or Xbox. Of course, the sticks can also be used for real drum sets. For proper functionality, you…
If you have a Pearl 900 series cymbal stand and this piece broke for you, I got you covered. I designed this because mine broke back in 2018 and I was on a hurry. 7 years onwards and its still working perfectly ! If you don't want to…
Drumstick Holder for Alesis Nitro Max Frame (Ø 35mm) Fits two Drumsticks, less than 19mm in Diameter. Prints without supports.
This model is a quick-release plate adapter that allows the Aerodrums camera to be mounted on any standard tripod using a simple and secure mechanism. The original camera is not a typical webcam, but this mount holds it firmly in place…
Made this to clip two sticks together and to have space to add some personalized cut out (e.g. initials). It's made of two parts, the clip part prints upright, then you print the insert flat, potentially in a different color. In your…
This is a lightsaber designed to go on the bottom of your drumstick, to turn the stick into a blade. PAY ATTENTION TO THIS* --> This model will download sized for a 2a (16mm diameter) drumstick. This is the thickest size, so once it is…
This is a lightsaber designed to go on the bottom of your drumstick, to turn the stick into a blade. For this drumsaber, if you have PLA gloop, coat the thin part of the saber (Especially where the collars meet the rod) to give additional…
Drehknopf ersatzteil für das E-Drumset Millenium MPS-750X E-Drum Mesh Set
Having problems to find where to put your drumsticks when you finally take a rest from your electronic drums? You are not alone, so here is an holder suited for Roland electronic drums where the rack has 39mm pole ends where you can print…
This DrumStick-Holder is working for the most drumsticks and HiHats. You can simply grab your stick without loosing time. Sizes: Stick-sizes: Diameter 1.3 - 1.6 cm HiHat sizes: Diameter 1.9-2.5 cm Print: Filament: ~ 3g PLA Printing-time:…
8" diameter, includes vent. Printed in ABS, 4 walls, 15% gyroid infill.
scale to 134% [will be improved later] 4 walls supports[?might be ok without, untested.] adhesion [optional] low quality [.28mm] infill [might be optional, I did 20% cubic for the heck of it] Just thought it would be cool to share for…
Drumstick Display – 3D Printable This drumstick display is designed to showcase your drumsticks in a clean and organised way. Perfect for displaying favourite sticks, signature models, or special editions, it keeps them visible and neatly…
