1 / 4
DIN Rail Cover Strip for DIN slot Hutschiene
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIN rail cover, printed without supports. Easy to trim by hand.
- Ocena
- 5 / 5
- Polubienia
- 70
- Pobrania
- 680
- Wydruki
- 10
- Wyświetlenia
- 1620
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 10) (Komentarze: 10)Remiksy (0)Kolekcje (125)Powiązane
DIN Rail Cover
This cover is designed for DIN rails and comes in various widths.
If needed, the strips can be easily trimmed by hand or by using a knife.
Print instructions:
- Layer Height: 0.2 mm
- Nozzle Size: 0.4 mm
- Prints flat on the bed
- Simple and quick to print
- No support needed
- Can be easily trimmed with a knife
I’m looking forward to seeing your makes and hope you enjoy it!