1 / 2
Sloted bolt and nut for wall mounted cable organizing
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sloted bolt and nut for clamping and wall mounting cable organisation.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Mount a ladder to your wall for great cable organisation in your gadget closet.
- Just add double-sided tape to the back side of the bolt and stick it to the wall.
- Place the ladder
- Screw on the bolts
- Attach your cables.
I used a wire mesh for concrete casting as my ladder. The slot is 3mm (about 1/8 inch) and my mesh is 2,6mm which fits great.
If you want more distance from the wall you can use spacers. There is 2 different bolts one 40mm and one 60mm in height. I have added 2 spacers (5mm & 10mm). Mix and match as it suits you.
As the base for this I used the awesome design from Nazukao | Printables.com and modified it a bit.