1 / 4
Colt SAA Revolver Miniature
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Miniature of a Colt SAA Revolver, 9cm/3.5in.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 473
- Wydruki
- 1
- Wyświetlenia
- 2110
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (12)Wydruki i komentarze (Wydruki: 1) (Komentarze: 4)Remiksy (0)Kolekcje (63)Powiązane
Miniature of a Colt SAA Revolver (Storekeeper or Sheriff model) with classic octagon barrel.
- Prints as 6 different parts that are press-fit together.
- Simplified model: The hammer is fixed and no loading gate. Trigger moves but does nothing. Cylinder is free spinning and fidget friendly.
- Alternatives with or without loop for attaching to lanyard or key-chain.
Printing Tips
- Model is optimized for easy printing without supports.
- Bed adhesion can be a challenge given how small the parts are. I printed without any brim but had to clean the bed with dish soap first.
- Models are already in recommended print orientation.
- Print the parts in different colors for a more interesting look.
- 0.15mm layer height recommended.
Assembly
- Insert the trigger from inside the frame. It can be a bit tight, just press it in all the way.
- The “frame insert” part comes next. Get it in and press firmly in place.
- Cylinder and base pin: align and press in the pin.
- Grip side covers: snip apart and press in place.