1 / 4
Guia superior con soporte para sensor de filamento y soporte para 4 filamentos - Upper guide with filament sensor holder and 4 filament holder — zdjęcie 1
1 / 4

Guia superior con soporte para sensor de filamento y soporte para 4 filamentos - Upper guide with filament sensor holder and 4 filament holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Guia superior con soporte para sensor de filamento y soporte para 4 filamentos - Upper guide with filament sensor holder

Ocena
0 / 5
Polubienia
5
Pobrania
44
Wydruki
0
Wyświetlenia
457
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

ESPAÑOL:
Es un remix de un soporte superior con guia para Ender 3 V3 KE, soporte del sensor de filamento, y también soporte para dejar en espera 4 filamentos para realizar cambios de color rapidamente sin tener que enrollar en cada momento.
Lo ideal es tener los carretes de filamentos ubicados en un estante superior a la altura de la impresora. pero por el momento va todo bien.

Impresion:
Impreso en PLA.
Configuración de stock
2 paredes

15% de relleno

altura de capa 0.2mm

 

 

El soporte se ancla al puente / marco superior, con los tornillos cabeza allen del soporte original que viene con la impresora.
Se utilizaron conectores Racor M6.

El orificio por donde debe pasar el tornillo de ajuste del sensor de filamento, debe ser repasado con una mecha de 2,5mm aprox, para que el tornillo quede “libre”.
El tornillo que se usa para el sensor, es el que viene originalmente.

El modelo se puede simplificar para evitar usar los conectores racor, y utilizar solo teflón para la guía superior como para el soporte de filamentos en espera.


ENGLISH:
It is a remix of a top support with guide for Ender 3 V3 KE, filament sensor support, and also a support to leave 4 filaments on hold to make color changes quickly without having to wind them every time.
Ideally, you should have the filament reels located on a top shelf at the height of the printer, but for the moment everything is going well.

 

Printing:
Printed in PLA.
Stock configuration
2 walls

15% infill

layer height 0.2mm

 

The support is anchored to the upper bridge / frame, with the allen head screws from the original support that comes with the printer.
Racor M6 connectors were used.

The hole where the filament sensor adjustment screw must pass through, must be drilled with a drill bit of approximately 2.5mm, so that the screw is “free”.
The screw used for the sensor is the one that comes originally.

The model can be simplified to avoid using the fittings, and use only Teflon for the upper guide as well as for the standby filament support.

Tagi