1 / 4
Creality Ender 3 S1 Y mount upgrade (Two-axis fasteners)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CrealitEnder 3 S1 Y stepper motor mount upgrade with two-axis fasteners. Stiffer mounting and less vibration and noise.
- Ocena
- 4 / 5
- Polubienia
- 17
- Pobrania
- 92
- Wydruki
- 1
- Wyświetlenia
- 508
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (36)Powiązane
Ender 3 S1 Y stepper motor mount upgrade.
Ender 3 S1 Y stepper motor mount upgrade with two-axis fasteners. Stiffer mounting, less vibration and noise.
Vibrations on the Y-axis are about 20% less, comparing the amplitude of the vibration peak from the Input Shaper graphs.
Assembly will require:
- 2 M3 bolts by 10 mm. (you can modify the model to use the same type of screws, but I didn't have time to do it)
- 2 M3 bolts 8 mm (second axis of fasteners)
Also, the range of motion in the Y axis may have increased slightly (by 1-2 mm). Take this into account during installation.
Print:
Print in PET-G as shown on pics
