1 / 2
Metal Honeycomb Magnetic Holddown - 1-4mm with legends
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Metal Honeycomb Magnetic Holddown - 1-4mm with legends
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 101
- Wydruki
- 2
- Wyświetlenia
- 427
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (29)Powiązane
This is a magnetic hold down for metal honeycombs for laser cutters.
This accommodates 1-4mm thick material and has mm height legends on the top side for reference.
Need more force to hold down a warped sheet? Place multiple in the same location to have more hold down strength. I printed up (12) of these to have enough on hand for challenging material pieces.
Uses 12x3 rare earth magnets secured with super glue.
The magnets protrude a mm or so from the plastic so the holder can be used on slightly taller material than 4mm.
