NOZZLE WIPE/COVER FOR THE P1P
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an A1 mini wiper conversion for the P1P
- Ocena
- 4 / 5
- Polubienia
- 9
- Pobrania
- 86
- Wydruki
- 1
- Wyświetlenia
- 475
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This mod adds the A1 wiper to the P1P/P1S!!!
This wiper cover is one of the best designs to stop all the filament from going every ware it shouldn't. The bigger more readily available A1 silicone wiper strips can be found on Amazon here: Amazon.com: Imdinnogo 3D Printer Accessories BambuLab A1 Nozzle Brush Replacement Kit(3Pcs): Hotbed Mounted Silicone Wiper Cleaning-Tool, Not Compatible with A1 Mini : Industrial & Scientific
HOW TO INSTALL:
- Print the part using the .3fm file if you want to print with ASA/NYLON and PETG as the color.
2. Cut a 3x3 square and super glue the silicone pad in place (let sit for 3hr).
3. Place the wiper/cover into the shoot area and press down into place. Push firmly down on the two front corners, the rear corners float in place and are supported by the rest of the structure.
HOW TO USE THE .3mf file(s) for the AMS with two dissimilar filament at the same time :
Load the .3mf file into Orca Slicer.
The file is set to use ASA/NYLON as the main filament & PETG as the color filament for the Bambu Logo. (you can change the color to what ever you need)
Place your roll of ASA/NYLON in bay 1 with the K factor set to (ASA 0.015 or NYLON 0.020). Choose basic PETG as the filament type.
Place your roll of PETG in bay 2 with the K factor set to 0.030. Choose basic PETG as the filament type
Hit Print!