Rival Artemis Replacement Front Grip, Pins, and Template.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement for the front grip of the Artemis. My version, but you can make your own with included cutout.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
I didn't like the front grip of the Artemis. Like using a soda can for a grip. So I made my own grip. It is small and thin, but it is a one piece. Also, I made it work with printed pins so you don't need to worry about hardware.
I also uploaded the negative I made, so if you want to try and make your own grip, go right ahead.
I ALSO included the Bambu file I used to print. I added a modifier to the handle to print a reinforced structure within that will print at 50% fill, to shore up the regular 25% fill I did.
I also had the pins print at 100%.
You may also want to play with the position of the seam, as well.