Triangular "StandBy Mode" Dock for iPhone
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple triangular charging dock for iPhone and Apple Watch, intended to be broadly model-and case-compatible.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 251
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
In response to the very popular iPhone Standby Mode Dock, something that should work for just about any MagSafe iPhone without modification – a simple triangle.
Unlike the popular spherical docks, this has a minimal profile and a chamfer along either side of the MagSafe charger to maximize case-compatibility. There's a spot for a watch charger in the back. I sized this for my particular 1Phone 14 Pro and case, but it should work for just about any iPhone and case due to the reduced dimensions at the sides. Camera left or right, it's all the same.
I included plenty of open internal volume so the cables don't lift the base due to any tight bends at the bottom and to make passing the connectors through easier.
There are four voids for optional embedded magnets since I have a metal bedside table. The voids are currently sized for ceramic magnets 6mm tall and 10mm in diameter; just pause the print before the voids are closed and drop in your magnets.
Prints great without support, brim, or other frippery.