1 / 4
Heads Up XM Remote - Battery Cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Battery Cover for Heads Up Technologies XM Remote P/N XMC050-01 commonly used with XMD076 XM Data Receiver
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary:
This is a replacement battery cover for Heads Up Technologies XMC050-01 Bluetooth Remote. This remote is commonly found in general aviation aircraft that use the XMD076 XM Data Receiver. Remote pictured is from a Cirrus SR22.
Print Settings:
- Quality: 0.2mm
- Infill: Any %
- Supports: Organic, Support on Build Plate Only
- Orientation: Horizontal (as pictured with supports)
- Material Recommendations: ABS or ASA
- Tested Materials:
- Prusament PLA - Not recommended as this remote will be exposed to excessive heat and UV radiation
- Inland ABS (Pictured) - Recommended for heat resistance
Notes:
- 3M Single Sided Foam Tape is recommended on back of cover to mimic original production model and provide pressure on batteries when installed.
- Do not print vertically, latch will break along layer lines.
Terms & Conditions:
- This model is intended for use by general aviation (GA) aircraft owner/operators as an owner produced part and is free to use for that purpose.
- Commercial production and/or sale not permitted, license available upon request.