1 / 4
Heads Up XM Remote - Battery Cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Battery Cover for Heads Up Technologies XM Remote P/N XMC050-01 commonly used with XMD076 XM Data Receiver
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 55
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary:
This is a replacement battery cover for Heads Up Technologies XMC050-01 Bluetooth Remote. This remote is commonly found in general aviation aircraft that use the XMD076 XM Data Receiver. Remote pictured is from a Cirrus SR22.
Print Settings:
- Quality: 0.2mm
- Infill: Any %
- Supports: Organic, Support on Build Plate Only
- Orientation: Horizontal (as pictured with supports)
- Material Recommendations: ABS or ASA
- Tested Materials:
- Prusament PLA - Not recommended as this remote will be exposed to excessive heat and UV radiation
- Inland ABS (Pictured) - Recommended for heat resistance
Notes:
- 3M Single Sided Foam Tape is recommended on back of cover to mimic original production model and provide pressure on batteries when installed.
- Do not print vertically, latch will break along layer lines.
Terms & Conditions:
- This model is intended for use by general aviation (GA) aircraft owner/operators as an owner produced part and is free to use for that purpose.
- Commercial production and/or sale not permitted, license available upon request.