Pulling Pin Assistants for CR Touch of V3SE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pulling pin assistants used to help you address an annoying issue or error in CR Touch of Ender 3 V3 SE by hand pulling.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 243
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
“CR Touch error, please contact customer service”
The problem of CR Touch in Ender series model 3 V3 SE as many people might experienced, and many people tried countless of method or techniques to address this stuck-CR-pin. One of the most popular method is using plier or something-like to pull the CR-Touch pin up to down and repeat, then restart the printer to solve the issues.
I believe many people might suffer with that method, so today I designed a Pulling Pin Assistants to help you out.
Print Requirements:
- Filament Type -PETG or ABS
- Infill - 100%
- Layer Height - 0.1 mm
- Speed - below 30mm/s
- Adhesion - No