Shallow Water Rc Jet Boat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rc Jet boat built for limited water
- Ocena
- 5 / 5
- Polubienia
- 176
- Pobrania
- 1321
- Wydruki
- 2
- Wyświetlenia
- 7259
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Share Alike
Parts (what I used)
Bronze Bushings -
https://www.amazon.com/gp/product/B07JLPC8TS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Shaft Couplers -
https://www.amazon.com/gp/product/B0867P8H6D/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Servo -
https://www.amazon.com/gp/product/B0BLBMVYCW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Esc -
https://www.amazon.com/gp/product/B071GRSFBD/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Motor -
https://www.amazon.com/gp/product/B08DLT47JS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Receiver -
https://www.amazon.com/gp/product/B09MVY4W7G/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Driveshaft -
https://www.amazon.com/gp/product/B083NXGP98/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Uses a 3s battery
Hull is printed as vertical as possible on the Bambu Lab x1c with 1 parameter for weight
Seal is printed out of ninja tek tpu
Lid is attached by 7 4-40 screws and nuts
Servo mount is held on with double sided tape
Esc is encased in resin in case of water entry
Receiver is coated in clear nail polish (I don't know if this actually works but it is still alive)
Fairly waterproof but not perfect (servo hole gets drilled by hand)
Will stall randomly if too much current is drawn