Miata MX5 NB Battery Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed a tray for the Miata's battery in the trunk. Glue the parts together and added some gorilla tape on the bottom
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 260
- Wydruki
- 1
- Wyświetlenia
- 1021
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Battery tray in my NB Miata was all smashed up and the battery was sliding and bumping around. Mazda no longer makes an OEM replacement so I designed a model in OnsShape based off the original tray. Split into two interlocking parts.
I was able to get them to click into place and super glued the pieces together with additional strips of gorilla tape on the bottom at the joints to ensure a solid connection. Was going to use epoxy but my tube was dried out.
Printed in PLA+ from Elegoo on a Flashforge Adventurer 5M Pro, .2mm layer height, 3 walls, 15% gyroid infill, and with supports. Added a brim to ensure stability and enlarged the bases of the tree supports as I had an initial failure when the nozzle knocked one support over right before laying the bridge.
I also designed a version with a tiny bit more clearances on the interconnecting dovetails if you are worried about fitment. The original files are snug but worked for me.