Liczymy pasujące modele…
Codemonkey1973's Ender 3 Camera Mount for Raspberry Pi Camera V2.1 was very well designed but I wanted to cleanly route the cable to the back and saw room for improvement. So I rebuilt it with the following improvements: Threaded holes…
Works best in multicolor. I would recommend using a light color for the background and darker color for the top. I printed with 0.28mm layer height with no ironing which looks ok. 0.2mm layer height with ironing (top surface only) would…
Its a seatbelt guide that mounts to the tonneau cover bolt. You will need a m6 30mm long bolt, the original is too short. Recommend to print from PCTG ASA or Nylon. However i have broken some ASA seatbelt mount designs in the past, its a…
Works best in multicolor. I would recommend using a light color for the background and darker color for the top. I printed with 0.28mm layer height with no ironing which looks ok. 0.2mm layer height with ironing (top surface only) would…
Scaled down, mirrored and added background. Print with 0.2mm layer height and top surface ironing for best results. Use multicolor printing to add contrast between background and MX5. Cheers!
Opis PL Breloczek inspirowany frontem Hyundai Santa Fe MX5 – nowoczesny, minimalistyczny projekt stworzony z myślą o fanach marki Hyundai i SUV-ów. Charakterystyczne światła i linia przodu sprawiają, że model jest łatwo rozpoznawalny, a…
Wanted Polybush my mk1, but bush kit is extremley expensive, so went down the route of printing moulds and casting myself. Designed based of existing polybushes(borrowed of my friend and took dimensions). Printed in TPU95A, I would advise…
Simple camera holder for mx5 nc. 2 holes for screws and one hole for a cable. Remember to add some double-sided tape to make connection tight.
This is a frame-mounted controller bracket designed for Razor MX650 / MX500 bikes running a 48V battery while retaining the stock controller . When upgrading to 48V, the stock controller is often relocated or left poorly supported. This…
This removable mount attaches to the rear wind deflector in your Mazda MX5 Miata. You can easily remove the camera and mount and take it with you when parking with the top down to help prevent casual theft. Line the slot with a couple of…
This is a Mazda MX5 Miata toilet paper holder for your bathroom. You can print all the parts with minimal infill and supports are only recommended for under the Miata face part. This is made from the excellent Shaun the Toilet Sheep model…
This is a mount for 8 channels (137mm x 50mm) relay (holes at 44.7mm x 131.5mm). Supposed to be used with 2 clips from https://www.printables.com/fr/model/303480-din-rail-raspberry-pi-34-holder M2x16mm screws required. Printed with…
Resized the model to work for the Arducam 16MP w/ the Sony IMX519 sensor. You'll still need the original corner mount, from here .
Sewing guide to sew straight lines with a hole for a magnet with 18mm radius and 5mm thick I added the fusion 360 file and you can go back in history and change the size of the hole sketch and how much you pull (for the magnet depth)
Exactly as it says. Part will seem a few MM short but thats to keep it tight against the peg. stretching in Z axis should loosen. **Tested on a 300Whp MSM in heat index of 110*F on a 2 hour drive. I do not baby my cars I enjoy them. I…
Print the STL mirrored for other half. There will be a small gap in the center but can be melted together. included scan in Step file for those who are mounting a pi to the back. Cluster lense will snap to baseplate but there will be a…
Border for a Mazda MX5 / Miata NA 1989-1998 non electrical side mirror
cupholders that are designed to sit at the back of the mx5 mk1 (NA) / mk2 (NB) centre console
Battery cover for the MX500 remote control made by Home Theater Master. Printed fine using black Sovol PLA on an SV06 printer. I used PrusaSlicer 2.8.1 with the standard SV06 ‘0.20 mm SPEED’ profile and ‘Support on build plate only’.
magnetic mount / holder for the ltt screwdriver requires 2 20mmx5mm magnets and some super glue tested on pla with support for the holes. probably works for any solid filament
Its a seatbelt guide that mounts to the tonneau cover bolt. You will need a m6 30mm long bolt, the original is too short. Recommend to print from PCTG ASA or Nylon. However i have broken some ASA seatbelt mount designs in the past, its a…
A surround for the Speedometer/display unit. Note: This surround / binnacle. / cowl is designed with button cut outs and from measurement of the two button digital display as fitted from model year 2020 onwards (led headlight models)…
MAZDA MX5 NB Miata Cup holder ('Project DEX'): ======================================= Purpose: ---------- This design is created to address the issue of having lack of a cup holder available in Mazda MX 5 NB (Miata) from the 90's until…
The bracket uses two of the holes holding the shield together and slots into the plastic part above it. Not very sturdy but should work fine. Assembly The mount is designed for M2 inserts for mounting the plate. E-Mail me at…
I included a paramaterized Fusion 360 file if anyone would like to modify it for their needs. Print suggestions: I printed with: 4mm nozzle 0.2mm layer height PETG (would recommend ABS or material more suited for UV/heat) Tree supports…
i have made these Mazda miata mx5 aerodynamic canards for my car to have a little more downforce
BOM You will need the following: 1x RAM-compatible 1-inch ball with M6 thread, I have used one from FANAUE ( Aliexpress ) 1x RAM-compatble phone holder with 1-inch ball, I have used FANAUE CPC-06 ( Aliexpress ) 2x M6 hex nut 1x M6 40mm…
Control knobs to fit over the stock 2007 heater controls. Add some colour and better grip.
Brake Duct for Mazda MX-5 NA (R-Lip Mount) – STEP File for Easy Customization Enhance the braking performance of your Mazda MX-5 NA with this custom-designed Brake Duct, optimized for mounting on the R-lip of the vehicle. This model comes…
Mission: I was given the task of designing a solution for a math teacher who had requested a model of the conic sections to help her students deepen their understanding of the topics they were learning about. I included 3 conic sections…
This is a support for a Crucial MX500 SSD in order to adapt it to a desktop computer rack Works also for a Crucial BX500 Printable without support !
Battery tray in my NB Miata was all smashed up and the battery was sliding and bumping around. Mazda no longer makes an OEM replacement so I designed a model in OnsShape based off the original tray. Split into two interlocking parts. I…
This product is a center panel bezel designed for the console of a Mazda MX-5 NA (1989-1998). Crafted with a functional and elegant design, it features two circular slots ideal for accessories or gauges, plus an additional rectangular…
Capot pour prise suppression EGR mx5 nbfl. A imprimer en ASA, ABS ou tout autre matière adaptée aux conditions sous un capot. Petg possible également. Plus d'explications ici :
Model Source Files The model can be edited by forking the Onshape Document . Suggestions and comments are welcome as I'm very new to 3d modelling and CAD. Background Early versions of the Mazda Miata MX5 NC (MK3), specifically models…
Hook Adapter for a wide hanger that has spring wire clip clothes pin. 6mm stud x ~50mm hanger - see pics for real life application! They work great so I can hook my hat on them quickly instead of having to reach up and spread the wire…
Part of the OpenScan Benchy 3D Scanner comparison, see https://github.com/OpenScanEu/OpenScanBenchy/ We publish all the original files (send by the participants) as well as the aligned version shown in the final rendering. Feel free to…
STP file provided to create your own custom holder. I hollowed mine out to accommodate my magsafe wallet and some storage. (file is for a normal iphone 15 with a mous case) Add tree supports along the lip. Printed mine in PETG with a 0.6…
Nab for Reel to Reel Otari MX5050. This is a prototype, but it seems to be functional. 3x M3-16 (M3-18 - depends on the type of screw / screw head used) are needed for assembly. Pad Washer needs to be printed from TPU, but also works from…
Mx-5 cartoonish version style keychain, 3 color print Recommended print size is 130%+ for hobby printers, otherwise it will be too tiny to assemble and possibly fragile Tolerances are quite small, so it would be possible to assemble it…
An easy print to clean up the mount area after removing the sun visor on a Mazda MX-5 / Miata. Snadný tisk pro zakrytí montážního místa po demontáži sluneční clony na Mazdě MX-5 / Miat
A couple of years ago I purchased the MX5things Trunk Lid Popper mod for my ND Miata. I recently noticed the trunk lid did not sit flush, and that MX5things sells U-shaped washers to solve the issue. Via email, Sergey said that any 0.05"…
Scaled down, mirrored and added background. Print with 0.2mm layer height and top surface ironing for best results. Use multicolor printing to add contrast between background and MX5. Cheers!
This is my first attempt at a 3D model using TinkerCAD. This was an attempt at making a mud guard for our MX500 dirt bike. Mud guard is affixed to the bike with two zip ties. I used automatic tree supports generated by OrcaSlicer to…
Hi I bought a chinese cheap Din2 car audio for my old lady, my need was a radio frame, i believe that this design can fit to others carplayer 7 inch with the same chassis, please have a look of pictures whre this is the side of the…
Update 20260322 add version with hole for standard round switch 18, 3mm inner holes and with collar of 23 mm in combo with usb holder, i enlarge also the clearance, means that it fit well now, 20250707 As per subject, my need was an USB…
Replacement part for the radio console of the Mazda Miata MX5 NA (built 89-98). The shelf has been moved up and made deeper (165mm deep). The radio slot has been moved down and designed for a DIN 1 mounting frame. Do not print these parts…
Customized version of http://www.thingiverse.com/thing:193647 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=193647 Instructions Using the following options: thread_step = 1.5 resolution = 0.5…
This is a "button extender" for the traction control switch on the ND Mazda MX5. If you are racing the car and forget to turn off traction control this part makes it easy to find the button. Category: Automotive
Remix of Back and Cover for Raspberry Pi Waveshare Autofocus AF IMX519 16MP Camera. The bolt and ball from original file are best printed in 45o, for more stronger.
Installation tool for mood upper ball joint mk1 mx5 / NA Miata. The way they suggest to install (with grips) leaves it high likely to tear the boot and you cannot buy separately. The tool has radius corners and holds the boot nicely and…
Not mine, received from another site but this site did not have it. Cannot add the option on re-posting from another site. Site taken from; https://makerworld.com/en/models/1608868-mazda-mx5-mk1-mk2-wiper-cap-cover
This is a bracket that keeps is place the OEM driver's side floor mat. Sometimes it gets lost but now you can print one easily for yourself in about 1h15min with 10grams of material. It has a hinge inside that permits to rotate the little…
I have this DMX512 2.4G receiver: Wiederaufladbar DMX512 Funk 2.4G Receiver Empfänger Controller für Bühnenlicht | eBay.de Powering this device on or switching the channel needs a pencil because the buttons are only accessible through…
Quickly threw together a bezel to fill the gaps between my Eonon UX6S head unit and fascia of the dash in my MX-5. Snug fit which requires removal of the stereo trim around the head unit (this pops off). Tried to match the heating control…
Needed a Disconnect Switch for my Razor MX500 to prevent my 48V LiFePO4 battery from being slowly drained by ghost controller current that keeps slowly being drawn even after turning the controller key switch to off. I found this nice…
My center caps needed to be replaced. I've not found any models for my set of rims, the 16" of NBFL Sport with 52mm hole , and OEMs are pretty expensive, so I made them with the old ‘59 Mazda logo. I used PETG and after six month, with a…
Important: Note that this part is not symmetric, one side has a slightly wider edge. Print it with that side down. Scrape all the rubber off the scroll wheel before installing. The wider edge needs to go to the right side of the final…
Opis PL Breloczek inspirowany frontem Hyundai Santa Fe MX5 – nowoczesny, minimalistyczny projekt stworzony z myślą o fanach marki Hyundai i SUV-ów. Charakterystyczne światła i linia przodu sprawiają, że model jest łatwo rozpoznawalny, a…
Remix of catan card holder by David Týř but for bigger cards
Wanted Polybush my mk1, but bush kit is extremley expensive, so went down the route of printing moulds and casting myself. Designed based of existing polybushes(borrowed of my friend and took dimensions). Printed in TPU95A, I would advise…
This can be a replacement for a missing wiper cap cover on the Mazda Mx5 Mk1 or Mk2. Made using measurements from the original to match as close as possible. This is a snug fit so you might need to gently tap it in. This can be a…
Simple camera holder for mx5 nc. 2 holes for screws and one hole for a cable. Remember to add some double-sided tape to make connection tight.
This is a frame-mounted controller bracket designed for Razor MX650 / MX500 bikes running a 48V battery while retaining the stock controller . When upgrading to 48V, the stock controller is often relocated or left poorly supported. This…
If you, like me, changed the handbrake handle and kept the original gaiter, you'll have an annoying space between the gaiter leather and the lever beneath. I designed this bushing that fits the gap, adapting between the lever and the…
This removable mount attaches to the rear wind deflector in your Mazda MX5 Miata. You can easily remove the camera and mount and take it with you when parking with the top down to help prevent casual theft. Line the slot with a couple of…
This is a Mazda MX5 Miata toilet paper holder for your bathroom. You can print all the parts with minimal infill and supports are only recommended for under the Miata face part. This is made from the excellent Shaun the Toilet Sheep model…
I was missing a Boot Rubber Stopper on my MX5 NB, and because of that the boot was not sitting straight. I jumped into CAD and designed. I printed in TPU 95A, with 2 walls and 8% infil and it feels good. You can also use 90A or 85A. There…
This is an improved version with an hole. Use an M3 x 30 screw and press-fit a M3x4 bushing on the opposite side to keep the screw in place. Original design kept failing after vibrations due to the phone weight (I have an iPhone 16 with…
Description: I got myself a silicone intake elbow to do a sound tube delete on my NC2, and needed something to connect the breather hose to the elbow. This worked amazingly and has been on the car for a few months now without any issues.…
this is made of aluminum, but in case anyone wants dimensions, here it is. https://www.electricvelocitypnw.com/product/adjustable-motor-mount-chain-tensioner-for-razor
My first 'production' scan using : OpenScan Classic Arducam IMX519 Focus Stacking OpenScan3 beta Meshroom Photgrammetry Turntable flow FeatureExtraction: sift, dspsift, akaze Describer Density+Quality = ultra Meshing: Max Input Points +…
If you own an Evakool TMX series portable fridge, you already know how difficult it can be to source factory replacement parts when the original lid hardware cracks or snaps. I designed and engineered this heavy-duty replacement lid latch…
needs to be scaled down for printing there is no definite intended way to hang this, a couple small nails will probably work original silhouette is from Kdon , credit where its due
I advice printing it in PETG or ABS. not sure how long PLA wil last or if it gets hot at all. hardware needed: 1x M6x1.0 40mm 3x M6x1.0 20mm 4x M6 nuts 9x M6 washers installation can be a bit tedious because you cant really acces the…
Radio holder that has space for gauges or other accessories. Snaps into place.
A remix to remove the swivel mount which i found to be unreliable Category: Automotive
Customized version of https://www.thingiverse.com/thing:2187167 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2187167 Instructions Using the following options: enable_male_leaf = 1 enable_female_leaf =…
A handy wrench that fits the antenna on early Miata MX5. Keep it on your key ring and use it to remove the antenna before using a car wash, or installing a car cover. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No…
Chess Dubrovnik Set - mod easy to print Kingsize 3.86" (for a board with 58mmx58mm fieldsize) Chess #Dubrovnik #Staunton /////////////////////////////////////////////////////////////////////////////// The set - except of the knight - is a…
Chess Dubrovnik Set - mod easy-print Kingsize 3.75" (FIDE) (for a board with 2x2 inch / 50mmx50mm fieldsize) Chess #Dubrovnik #Staunton //////////////////////////////////////////////////////////////////////////////// The set - except of…
My NB8B came from factory with speakers in the windblocker. When I installed a rollbar the windblocker had to go unfortunately. This speaker pod is designed to mount to a Mirack 'Herrero' Rollbar, or any rollbar with 45mm OD tubing. The…
I modified the original as it was too hard to print. I modified the model and fixed many of the imperfections and broken meshes. I also separated the wheels from the body as printing the whole thing with supports was proving a bit…
Rubber bumper for a luggage rack for the decklid on a NA Mazda MX5
Not technically a remix. I used mgx's wonderful Pegstr - Pegboard Wizard SCAD program to create several customized tool holders. Follow the link to Pestr to make your own. Using same license attributes as mgx.
Made for 24"x 24" x24" enclosure kit I bought of of Esty. intended to use 3 M5s per corner. holes are offset to make assembly easier.
designed for a 175mm by 53 mm lifepo4 cell Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 200 Infill: 38 Filament: generic PETG transparent orange Category: Electronics
enlarged version of cup holder storage with a slot added for phone cable Print Settings Printer: BFB IeC refurbished Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament: Filoalfa - Alfapro professional pla black Category:…
I wanted to set up my miata/mx5's plate lower, but couldn't find any commercial kit for that purpose, so I decided to design one! The idea was to design it with two parts: One is flexible and then can be easily deformed to be sticked to…
Remixed from bbeavis design (https://www.thingiverse.com/thing:3063090) I printed his but it was too thin, so I decided to beef it up and also change the design. It's also 2cm longer to be closer to your shoulder. I advise you to print…
I needed a gasoline funnel for my Mazda MX5. Most of the relatively big funnels are centered hole, but due to to the fuel door at the left, I could only use a very small funnel while refuelling the car. This would create a mess and would…
![Chess Figure Set Dubrovnik [Kingsize 3.86"] - mod easy-to-print [for a board with 58mmx58mm fieldsize]](https://media.printables.com/media/prints/214964/images/1964918_1f7f8524-10d4-47f4-a17c-7be02bcff904/2022-05-27-20_52_51-window.jpg)
![Chess Figure Set Dubrovnik [FIDE-Kingsize 3.75"] - mod easy-to-print [for a board with 2x2 inch / 50mmx50mm fieldsize]](https://media.printables.com/media/prints/214978/images/1965082_cc5a580a-e284-46ab-90c4-bd1b3406c6e9/2022-05-27-20_52_51-window.jpg)
